9201-05-00 Datasheet, PDF (2/2 Pages) RHOPOINT COMPONENTS – Surface Mount Reed Relays

9200-9300 Series/Surface Mount Reed Relays
Model Number
Parameters
Test Conditions
Units
COIL SPECS.
Nom. Coil Voltage
Max. Coil Voltage
Coil Resistance
Operate Voltage
Release Voltage
CONTACT RATINGS
Switching Voltage
Switching Current
Carry Current
Contact Rating
Life Expectancy-Typical¹
Static Contact
Resistance (max. init.)
Dynamic Contact
Resistance (max. init.)
RELAY SPECIFICATIONS
Insulation Resistance
(minimum)
Capacitance - Typical
Across Open Contacts
Open Contact to Coil
Contact to Shield
Dielectric Strength
(minimum)
Operate Time - including
bounce - Typical
Release Time - Typical
+/- 10%, 25° C
Must Operate by
Must Release by
VDC
VDC
Ω
VDC - Max.
VDC - Min.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Max DC/Peak AC Resist.
Signal Level 1.0V,10mA
50mV, 10mA
0.5V, 50mA
at 100 Hz, 1.5 msec
Volts
Amps
Amps
Watts
x 10⁶ Ops.
Ω
Ω
Between all Isolated Pins
at 100V, 25°C, 40% RH
No Shield
Shield Floating
Shield Guarding
No Shield
Shield Floating
Shield Guarding
Contacts Open,
Shield Floating
Between Contacts
Contacts to Shield
Contacts/Shield to Coil
At Nominal Coil Voltage,
30 Hz Square Wave
Zener-Diode Suppression⁴
Ω
pF
pF
pF
pF
pF
pF
pF
VDC/peak AC
VDC/peak AC
VDC/peak AC
msec.
msec.
Top View:
Dot stamped on top of relay refers to pin #1 location
9201
1 Form A
5 12
6.5 15.0
250 650
3.75 9.0
0.4 1.0
200
0.5
1.5
10
1000
0.150
0.200
x 10¹²
0.7
-
-
1.4
-
-
-
300
-
1500
0.40
0.10
9202
1 Form A
50 Ω Coaxial
9301
1 Form A
5 12
6.5 15.0
150 650
3.75 9.0
0.4 1.0
5 12
6.5 15.0
350 1000
3.75 9.0
0.4 1.0
200
0.5
1.5
10
1000
0.150
0.200
200
0.5
1.5
15
250
0.150
0.200
x 10¹²
-
0.8
0.1
-
1.4
0.2
1.4
300
1500
1500
0.40
0.10
x 10¹²
0.7
-
-
1.4
-
-
-
x 500³
-
1500
0.40
0.10
Notes:
1_{Consult factory for life expectancy at other switching loads.}
2_{Surface mount component processing temperature:}
430°F(221°C) max for 1 minute dwell time. Temperature
measured on leads where lead exits molded package.
3_{Higher dielectric strength available, consult factory.}
4_{Consists of 20V Zener-diode and 1N1002 diode in series,}
connected in parallel with coil.
Environmental Ratings
Storage Temp: ^-35°C to ^+100°C;
Operating Temp: ^-20°C to ^+85°C
The operate and release voltage and the coil resistance
are specified at 25°C. These values vary by approximately
0.4%/°C as the ambient temperature varies.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
Rhopoint Components Ltd Fax: [phone] Phone: [phone] web: www.rhopointcomponents.com e-mail: [e-mail]