OTLH-0090-BU Datasheet, PDF (1/4 Pages) RHOPOINT COMPONENTS – HIGH FLUX LED ILLUMINATORS

HIGH FLUX LED ILLUMINATORS- 12 VOLT

PRODUCT DESCRIPTION
The OTLH-0090-BU, OTLH-0100-GN, and OTLH-0120-WT continue the series of high flux LED based
illuminators with a reduced forward voltage version of blue (470nm), green (530nm), and white visible
emissions. These parts were created to be more compatible with the forward voltages of the OTLH-0040-
RD and OTLH-0030-AM red and amber devices. These LED’s utilize InGaN die. The LED’s are mounted
on a BeO substrate which is attached to a TO-66 power package to ensure high reliability through efficient
heat transfer. These illuminators are intended for use in high luminous, hard to access applications such
as Aerospace Lighting, Emergency & Signal Lighting, Hazardous Lighting, Electronic Signs, and General
Industrial Lighting and Illumination.
ILLUMINATOR PART NUMBER GUIDE
PART NUMBER
OTLH-0090-BU
OTLH-0100-GN
OTLH-0120-WT
COLOR
BLUE
GREEN
WHITE
DOMINANT WAVELENGTH
(TYP λD, nm)
470
530
N/A
TYPICAL INITIAL STATIC LUMINOUS FLUX
( TYP ΦV, lm, TJ = 25° C )
9.5 (IF = 480 mA)
42 (IF = 480 mA)
42 (IF = 480 mA)
ABSOLUTE MAXIMUM RATINGS (T_J = 25°C)
Power Dissipation
Blue, Green, White (Derate 240 mW/°C above 76°C):
Static Forward Current
Blue, Green, White:
Peak Forward Current
Blue, Green, White:
( Pulse Width ≤ 10 ms and Duty Cycle ≤
10%)
Reverse Leakage (Vr = 15 Volts)
TBD
Lead Soldering Temperature
≤ 240 °C for ≤ 10 seconds
5W
480 mA
3.2 A
RHOPOINT COMPONENTS LTD
Phone: [phone] Fax: [phone]
Email: [e-mail]
Website: www.rhopointcomponents.com
OTLH-SHK2-10 DATA SHEET REV. B (ECO 1111 8/16/02) Page 1 of 1