AKL Datasheet, PDF (3/3 Pages) Altech corporation – Polystyrene and Polycarbonate - 150x300mm (5.91x11.81in.)

Part Numbers and Configurations:
AKL Sensors
Part Number
AKL001-12
AKL002-12
AKL003-12
Single or Dual
Bridge
Single
Single
Single
Element
Spacing
(Microns)
1000
500
300
Marking
Part Number
Part Number
Part Number
Schematic:
A block diagram of the AKL series parts is shown below:
Voltage
Regulator
3.3V
GMR
Bridge
A
Offset
Detector
Switching
Current
Source
EEPROM Gain
A
Current Level
Packages:
The AKL series parts are available in the TDFN8 SO8 package. Please see the package
drawing section in the Appendix for dimensions.
Pin Configuration:
TDFN8-SO8 Package
Test
Test
Test
Bridge+
AKL001-12,
AKL002-12,
AKL003-12
Direction of Sensitivity
Test
Bridge-
VCC
Ground
Note: Bridge + and Bridge – are
provided for analysis purposes
only. NVE does not recommend
connecting these pins in a
production product, for ESD and
loading reasons. Also, all pins
labeled ‘Test’ must be floating,
i.e. not connected to each other,
or any other circuit node.
RHOPOINT COMPONENTS
Tel: [phone] Fax: [phone]
Web: www.rhopointcomponents.com Email: [e-mail]