L-14725 Datasheet, PDF (1/1 Pages) Rhombus Industries Inc. – POWER INDUCTORS

POWER INDUCTORS
Sendust Material (AL & Si Fe)
Well Suited for Switch Mode Power
Supplies and Regulator Applications.
Varnish Finish Optional by adding
a "V" suffix to the part number .
Core
Loss
@50kHz
5657
Core
Loss
@100kHz
16000
Core
Loss
@300kHz
83138
Core Loss in mW/cm³ @4000Gauss
Core Loss Data is provided for
comparison with other listed inductor materials
and is for reference only.
Electrical Specifications at 25^OC
Part
L ⁽¹⁾
Number (µH)
Typ.
IDC ⁽²⁾
20%
Amps
IDC⁽³⁾
50%
Amps
I ⁽⁴⁾
max.
Amps
DCR
Max
(mΩ)
Lead
Size
AWG
L-14725 108.4
6.50
14.62 9.70
45
17
1) Typical Inductance with no DC. Tolerance of +10%
2) Current which will produce a 20% reduction in L.
3) Current which will produce a 50% reduction in L.
4) Maximum DC current. This value is for a 40^oC temperature rise due to copper loss.
with AC flux density kept to 10 gauss or less. (This typically represents a current ripple of less than 1%).
.510
(12.95)
Typ..
Physical Dimensions
inches (mm)
Schematic
Diagram
1.520
(36.60)
Typ.
*0.375
(9.53)
.520
(13.20)
Typ.
*+0.125/-0.025
Lead diameter : 0.0483
RHOMBUS P/N: L-14725
CUST P/N:
NAME:
DATE: 2/14/00
SHEET:
1 OF 1
Rhombus
Industries Inc.
Transformers & Magnetic Products
www.rhombus-ind.com
15801 Chemical Lane, Huntington Beach, CA 92649
Phone: [phone]
FAX: [phone]