AIZ-55 Datasheet, PDF (1/2 Pages) Rhombus Industries Inc. – AIZ Series Passive 10-Tap DIP/SMD Delay Modules

AIZ Series Passive 10-Tap DIP/SMD Delay Modules
Low Profile 14-Pin Package
Two Surface Mount Versions
Low Distortion LC Network
10 Equal Delay Taps, Variety of Footprints
Fast Rise Time -- BW 0.35 / t_r
Standard Impedances: 50 - 75 - 100 - 200 Ω
Stable Delay vs. Temperature: 100 ppm/^OC
Operating Temperature Range -55^OC to +125^OC
Operating Specifications - Passive Delay Lines
Pulse Overshoot (Pos) .................................... 5% to 10%, typical
Pulse Distortion (S) ....................................................... 3% typical
Working Voltage ............................................... 25 VDC maximum
Dielectric Strength ............................................ 100VDC minimum
Insulation Resistance ......................... 1,000 MΩ min. @ 100VDC
Temperature Coefficient .................................. 70 ppm/^OC, typical
Bandwidth (f_C) .........................................................
0.35/t approx.
r
Operating Temperature Range ............................. -55^O to +125^OC
Storage Temperature Range ................................. -65^O to +150^OC
Electrical Specifications at 25^OC ^{1, 2, 3} Note: For SMD Package add "G" of "J" as below to P/N in Table
Delay Tolerances
Total
(ns)
Tap-to-Tap
(ns)
50 Ohm
Part Number
Rise
Time
(ns)
DCR
max.
(Ohms)
75 Ohm
Part Number
Rise
Time
(ns)
DCR
max.
(Ohms)
100 Ohm
Part Number
Rise
Time
(ns)
DCR
max.
(Ohms)
200 Ohm
Part Number
Rise
Time
(ns)
DCR
max.
(Ohms)
5.0 ± 0.5 0.5 ± 0.2 AIZ-55 1.5 0.8 AIZ-57 1.5 0.8 AIZ-51 1.5 0.8 AIZ-52 1.5 0.8
7.5 ± 0.5 0.75 ± 0.3 AIZ-7P55 1.8 0.8 AIZ-7P57 1.8 1.1 AIZ-7P51 1.8 0.8 AIZ-7P52 1.8 0.8
10 ± 1.0 1.0 ± 0.4 AIZ-105 2.0 .80 AIZ-107 2.0 1.1 AIZ-101 2.0 1.2 AIZ-102 2.0 1.7
15 ± 1.0 1.5 ± 0.5 AIZ-155 3.0 1.0 AIZ-157 3.0 1.3 AIZ-151 3.0 1.4 AIZ-152 3.0 1.9
20 ± 1.0 2.0 ± 0.5 AIZ-205 4.0 1.2 AIZ-207 4.0 1.5 AIZ-201 4.0 1.6 AIZ-202 4.0 2.4
25 ± 1.25 2.5 ± 0.5 AIZ-255 5.0 1.3 AIZ-257 5.0 1.6 AIZ-251 5.0 1.8 AIZ-252 5.0 3.4
30 ± 1.5 3.0 ± 0.6 AIZ-305 6.0 1.4 AIZ-307 6.0 1.9 AIZ-301 6.0 2.0 AIZ-302 6.0 3.7
35 ± 1.75 3.5 ± 1.0 AIZ-355 7.0 1.5 AIZ-357 7.0 2.6 AIZ-351 7.0 2.9 AIZ-352 7.0 4.0
40 ± 2.0 4.0 ± 1.0 AIZ-405 8.0 1.6 AIZ-407 8.0 2.9 AIZ-401 8.0 3.1 AIZ-402 8.0 4.3
50 ± 2.5 5.0 ± 1.0 AIZ-505 10.0 1.8 AIZ-507 10.0 3.2 AIZ-501 10.0 3.5 AIZ-502 10.0 5.6
60 ± 3.0 6.0 ± 1.5 AIZ-605 12.0 2.0 AIZ-607 12.0 3.5 AIZ-601 12.0 3.8 AIZ-602 12.0 6.1
75 ± 3.75 7.5 ± 1.5 AIZ-755 15.0 2.9 AIZ-757 15.0 4.5 AIZ-751 15.0 4.8 AIZ-752 15.0 6.8
80 ± 4.0 8.0 ± 1.8 AIZ-805 16.0 3.0 AIZ-807 16.0 4.8 AIZ-801 16.0 5.0 AIZ-802 16.0 7.0
100 ± 5.0 10.0 ± 2.0 AIZ-1005 20.0 3.4 AIZ-1007 20.0 4.9 AIZ-1001 20.0 5.6 AIZ-1002 20.0 8.0
120 ± 6.0 12.0 ± 2.5 AIZ-1205 24.0 3.7 AIZ-1207 24.0 5.5 AIZ-1201 24.0 6.0 AIZ-1202 25.0 12.0
125 ± 6.25 12.5 ± 2.5 AIZ-1255 25.0 3.9 AIZ-1257 25.0 5.6 AIZ-1251 25.0 6.3 AIZ-1252 26.0 12.3
150 ± 7.5 15.0 ± 3.0 AIZ-1505 30.0 4.8 AIZ-1507 30.0 6.3 AIZ-1501 30.0 6.8 AIZ-1502 32.0 13.5
1. Rise Times are measured from 10% to 90% points.
2. Delay Times measured at 50% point of leading edge.
3. Output (100% Tap) terminated to ground through R_L=Z_O
OPTIONAL SCHEMATICS: As below, with similar electricals per table these passive delays are available
in range of schematic styles (Contact factory for others not shown).
AIZ Style Schematic
Most Popular Footprint
COM 10% 30% 50% 70% 90% COM
14 13 12 11 10 9
8
AIY Style Schematic
Per table above,
substitute AIY for AIZ in P/N
N/C 100% 90% 80% 70% 60% 50%
14 13 12 11 10 9
8
AIU Style Schematic
Per table above,
substitute AIU for AIZ in P/N
COM 100% 90% 80% 70% 60% 50%
14 13 12 11 10 9
8
1
23
4
5
6
7
IN N/C 20% 40% 60% 80% 100%
1
23
4
5
6
7
COM IN 10% 20% 30% 40% COM
1
23
4
5
6
7
COM IN 10% 20% 30% 40% 50%
14-PIN PACKAGE OPTIONS: See Drawings on Page 2.
DIP
G-SMD
J-SMD
Available as Thru-hole (default) or SMD versions.
Add "G"
Add "J"
Gull wing SMD add "G" to end of P/N per table.
J-Bend SMD add "J" to end of P/N per table.
Specifications subject to change without notice.
Rhombus
Industries Inc.
For other values & Custom Designs, contact factory.
AIZ 9901
Page
1 of 2
15801 Chemical Lane, Huntington Beach, CA 92649-1595
Phone: [phone] • FAX: [phone]
www.rhombus-ind.com • email: [e-mail]