DS-C2O-3 Datasheet, PDF (7/8 Pages) rfsolutions.ltd – Easy to Configure using SMS commands.

Additional Commands for using the White List
Enable Call2Open Mode
from White List
Turns ON White list check. When C2O receives a call, it checks the
Caller ID, If it is in the list it will activate the output, then reject the
call (so there will be no charge).
(CTOWHL)
Command Example: Password123~CTOWHL
Response:
UID~CTOWHL~OK
Add a number to the
White List
There is a max of 99 numbers that can be stored.
We advise you keep a separate list numbers their positions.
Command Example to add 1273898000 to location 4:
Password1234~WHL04~1273898000
(WHL)
Check a number in the
White List
(WHL?)
Response: Password123~WHL04~1273898000~OK
Note: If your number has more than 23 digits, use the rightmost
ones. For example, if your number is 33446665555 you should pro-
gram 3446665555.
Reports back a telephone number from the White list
Command Example to report back the tel no in position 32:
Password123~WHL032?
Response: Password123~WHL032~1273898000
Delete a number in the
White List
(WHLD)
Command Example to delete the Tel no at loc’n 01:
Password123~WHL01D
Response:
Password123~WHL01~<0033612345678>~deleted
Delete ALL numbers in
the White List
(WHLALLD)
This command Deletes all telephone numbers within the White list
Command:
Password123~WHLALLD
Response
Password123~WHL~<ALL>~deleted
Enable Call2Open Mode
from Any number
Turns OFF White list check. When C2O receives a call from ANY Tel
number, it will activate the output, then reject the call (so there will
be no charge).
(CTOANY)
Command Example: Password123~CTOANY
Response:
UID~CTOANY~OK
DS-C2O-3