EMOD Datasheet, PDF (2/3 Pages) rfsolutions.ltd – Waterproof Radio Remote Controls

A
Waterproof Radio Remote Controls
EMOD
Series
Receiver Unit
Power Connections
+12V Red
0V (GND) Green
Antenna
(Black)
Fixing Hole
4mm DIA (R204 only)
RLY 1
RLY 3
RLY 2
NO NC
COM
RLY 4
5mm Spade terminals
Connections
The receiver can be powered from either 12Vdc as follows:
Red Wire:
Connect to 12Vdc for use with 12Vdc Supply only
Green Wire: Connect to 0V (GND)
Black Wire: Antenna. Do not cut this!. If possible position so that it protrudes in a vertical direction.
Data Outputs
Each output relay provides an isolated switch. Connections are Common (COM), Normally Open (NO) and
Normally Closed (NC).
Application Circuit
Supply
L N GND
RLY
Relay Connections when
Transmitter NOT Operating
Relay Connections when
Transmitter OPERATING
COM N/O N/C
Load
Please Note: The relay contacts are for functional use only and must not be used for isolation purposes.
Technical Specifications
Dimensions
204 Transmitter:
EMOD Receiver:
96 x 47 x 23mm
82 x 62 x 34 mm
120 Transmitter:
36 x 66 x 17 mm
Storage Temperature: -10 to +70^o Celsius. Operating Temperature: 0 to +55^o Celsius.
Electrical Characteristics
Min
Typical
Max
Supply Voltage: 12V Supply
11
12
16
Supply Current :
Quiescent
9
All Relays Operating
300
Time from Tx Switch depressed to 210Rx output
100
Time from Tx Switch release to Decoder output
200
Units
V
mA
mA
mSecs
mSecs
DS-EMOD-3 Oct ’07
©2007 RF Solutions Ltd, www.rfsolutions.co.uk Page 2
Tel [phone] Fax [phone]