AM-HIRK Datasheet, PDF (2/4 Pages) rfsolutions.ltd – RF RECEIVER DECODER HYBRID.

RF RECEIVER DECODER HYBRID.
AM-HIRK
Pin Descriptions
Pin No
1
2
3
7
11
13
14
15
16
18
19
20
21
22
23
24
25
Name
Vcc-RF
GND-RF
ANT
GND-RF
GND-AF
TP
O/P-AF
Vcc-AF
GND-AF
Link2
Link1
PSW
LED
O/P2
O/P3
O/P4
O/P1
Description
+5V Supply Voltage
RF Ground
Connect Antenna to this input
RF Ground
AF Ground
Test Point
Data output from RF receiver (CMOS/TTL signal)
+5V Supply Voltage
AF Ground
Connect to GND to make Link, may be left O/C if not required
Connect to GND to make Link, may be left O/C if not required
Programming Switch input, This is used when learning new transmitters.
External LED sink output, can be connected directly to cathode of external LED.
Connect Anode of the LED to +5V.
Indicates Data reception, and programming status.
Active High data Output 2 (has a 220Ω series resistor)
Active High data Output 3 (has a 220Ω series resistor)
Not Used
Active High data Output 1 (has a 220Ω series resistor)
Mechanical Details
63.5mm
14.5mm
12 3
7 11 13
18
25
See detail 'A'
Pins are on 0.1" Pitch
Detail 'A'
1.0mm
DS097-5 Feb ‘02
©2002 REG No 277 4001, England.
Page 2