UNI_RS232_USB Datasheet, PDF (1/9 Pages) rfsolutions.ltd – The Universal RFID Socket board is the baseboard for the MicroRWD RFID reader modules from IB Technology.

ib technology
Data Sheet
UNI_RS232_USB.pdf
9 Pages
Last Revised 03/09/09
Universal RFID Socket board with RS232 / USB interface
The Universal RFID Socket board is the baseboard for the MicroRWD RFID reader modules
from IB Technology.
82 mm
75
mm
MicroRWD modules are low-cost, pin compatible and host command compatible Proximity
reader modules for Hitag 1, Hitag S256/2048, Hitag 2, Mifare 1k/4k/Ultralight, ICODE SLI
and EM400X/4102 RFID tags and contactless smart cards. The module solutions only require
a 5v supply and an antenna coil to be fully featured read/write systems with optimised easy to
use host commands. All modules use the same universal 24 pin DIP package so customers can
migrate between different transponder technology with the minimum of design change.
Mifare
Quad Tag Hitag 1/S
Hitag 2
ICODE
EM Marin
The Universal Socket board provides the
antenna, power supply regulation and RS232 /
USB interfaces to the MicroRWD module
itself. Specifically the board has a 24 pin DIP
socket for the appropriate MicroRWD module
to be plugged into, LEDS for visual status
indication, selectable PCB and coil based
antenna for 13.56MHz and 125kHz operation
and voltage regulation allowing 9-12v DC
power supplies to be used.
The Universal Socket board with the
appropriate MicroRWD module fitted is a
complete “ready-to-use” RFID reader system
and is used in the SDK/Evaluation kit together
with sample tags/cards and CDROM containing
all the data sheets and Windows applications
(executable and C source).
1