RFSW6132 Datasheet, PDF (7/8 Pages) RF Micro Devices – SP3T Symmetric Switch, 10MHz to 6000MHz

RFSW6132
Pin Names and Descriptions
Pin
Name
Description
1
RFC
RF Common Port; external DC block required
2
NC
No internal connection
3
V1
Control 1
4
RF1
RF Port 1; external DC block required
5
RF2
RF Port 2; external DC block required
6
V2
Control 2
7
V3
Control 3
8
RF3
RF Port 3; external DC block required
EPAD
GND
RF and DC Ground; must be soldered to EVB ground plane over a bed of vias
Note: RFMD recommends that the NC pins be grounded on the EVB to maximize isolation.
Truth Table
Control Logic
RF Path Configuration
V1
V2
V3
RFC-RF1
RFC-RF2
RFC-RF3
1
0
0
On
Off
Off
0
1
0
Off
On
Off
0
0
1
Off
Off
On
1 = 1.8V to 5.0V
0 = 0V to 0.2V
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS131125
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
7 of 8