RFCA3302 Datasheet, PDF (7/8 Pages) RF Micro Devices – AMPLIFIER

RFCA3302
Pin Names and Descriptions
Pin
Name
Description
1
RFIN
RF input pin.
This pin requires the use of an external DC-blocking capacitor chosen for the frequency of operation.
2
GND
Connection to ground.
Use via holes for best performance to reduce lead inductance as close to ground leads as possible.
3
RFOUT/BIAS ^{RF output and bias pin.}
DC-voltage is present on this pin, therefore a DC-blocking capacitor is necessary for proper operation.
4
GND
Connection to ground.
Use via holes for best performance to reduce lead inductance as close to ground leads as possible.
Evaluation Board Assembly Drawing
DS120221
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
7 of 8