RF5365 Datasheet, PDF (7/11 Pages) RF Micro Devices – 2.4GHz to 2.5GHz, 802.11b/g/n WiFi Front End Module

RF5365
Evaluation Board Schematic
C1
10pF
RX
Vreg
C4
1nF
TX
C8
10pF
12
11
10
C2
10pF
1
9
BT
2
8
3
4
C6
1uF
7
5
6
L1
4.7nH
C7
1uF
ANT
C3
10pF
Pdet
C5
1nF
Note: Components C5, and C6 may not be needed in the final schematic. This will be dependent on board layout and noise coupling to these pins.
TX input connects directly to the transceiver. If no DC is present on this pin, C8 may also be eliminated.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140527
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
7 of 11