RFGA0014 Datasheet, PDF (6/7 Pages) RF Micro Devices – InGaP HBT MMIC Amplifier 50MHz TO 1000MHz

RFGA0014
Evaluation Board Assembly Drawing
Pin Names and Descriptions
Pin
Name Description
1
RF IN
RF Input. External DC block is required.
2
GND
DC and RF Ground
3
RF OUT/VCC ^{RF Output, Device Collector}
4
GND
DC and RF Ground. Must be soldered to EVB ground plane over a bed of vias for thermal and RF perfor-
mance.
6 of 7
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS121106