RFFM5765Q Datasheet, PDF (5/15 Pages) RF Micro Devices – Tested in Accordance with AEC-Q100 802.11b/g/n WiFi Front End Module

RFFM5765Q
Parameter
Specification
Unit
Min. Typ. Max.
Condition
Other Requirements
(continued)
Switch Control Current
2
10
A Per control line (C_BT, C_BWRX)
C_RX Current
100
150
A
Over V_CC, Frequency and Temperature.
Switch Control Speed
200
ns
Switch P1dB
28
dBm
ESD
Human Body Model
500
V
EIA/JESD22-114A RF pins
1000
V
EIA/JESD22-114A DC pins
Charge Device Model
500
V
JESD22-C101C all pins
Note 1: The PA module must operate with gated bias voltage input at 1% to 99% duty cycle.
Note 3: Values to be agreed to upon characterization data review: current, gain, return loss, detector sensitivity and output power.
Note 4: The output power for channels 1 and 11 may be reduced to meet FCC restricted band requirements.
Switch Control Logic
Mode
VREG
C_RX
C_BT
Standby
L
L
L
WiFi Tx
H
L
L
WiFi Rx
L
H
L
WiFi Rx/BT*
L
H
L
BT Rx
L
L
H
BT Tx
L
L
H
*The FEM can be placed in receive WiFi and Bluetooth modes simultaneously with increased insertion loss.
C_BWRX
L
L
L
H
L
L
DS121126
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
5 of 15