RFFM4527 Datasheet, PDF (5/7 Pages) RF Micro Devices – Wi-Fi Low Noise Amplifier

RFMD + TriQuint = Qorvo
Pin Out
VCC RF_OUT GND
6
5
4
RFFM4527
Wi-Fi Low Noise Amplifier
4900MHz to 5925MHz
1
2
3
CTRL RF_IN GND
Pin Names and Descriptions
PIN
1
2
3
4
5
6
Pkg Base
NAME
CTRL
RF_IN
GND
GND
RF_OUT
VCC
GND
DESCRIPTION
Control voltage for switch to toggle LNA or Bypass modes.
RF input port. This port is matched to 50Ω and DC blocked.
Not connected internally and can be left floating or connected to ground. Connecting this pin to
ground is recommended.
Not connected internally and can be left floating or connected to ground. Connecting this pin to
ground is recommended.
RF output port. This port is matched to 50Ω and DC blocked.
Supply voltage for LNA
Ground connection. The backside of the package should be connected to the ground plane
through a short path, i.e., PCB vias under the device are recommended.
Revision DS20160203
© 2016 RF Micro Devices, Inc.
5 of 7
Disclaimer: Subject to change without notice
www.rfmd.com / www.qorvo.com