RF7222 Datasheet, PDF (4/7 Pages) RF Micro Devices – 3V W-CDMA BAND 2 LINEAR PA MODULE

RF7222
Pin
1
2
3
4
5
6
7
8
9
10
Pkg
Base
Function
VBAT
RF IN
VMODE1
VMODE0
VEN
CPL_OUT
GND
CPL_IN
RF OUT
VCC
GND
Description
Supply voltage for bias circuitry and the first stage amplifier.
RF input internally matched to 50 and DC blocked. Input matching includes a shunt inductor to ground which
would short DC voltage placed on this pin.
Digital control input for power mode selection (see Operating Modes truth table).
Digital control input for power mode selection (see Operating Modes truth table).
Digital control input for PA enable and disable (see Operating Modes truth table).
Coupler output.
This pin must be grounded.
Coupler input used for cascading couplers in series. Terminate this pin with a 50 resistor if not connected to
another coupler.
RF output internally matched to 50and DC blocked.
Supply voltage for first and second stage amplifier.
Ground connection. The package backside should be soldered to a topside ground pad connecting to the PCB
ground plane with multiple ground vias. The pad should have a low thermal resistance and low electrical imped-
ance to the ground plane.
V_EN
V_MODE0 V_MODE1
V_BAT
Low
Low
Low
3.0V to 4.35V
Low
X
X
3.0V to 4.35V
High
Low
Low
3.0V to 4.35V
High
High
Low
3.0V to 4.35V
High
High
High
3.0V to 4.35V
V_CC
3.0V to 4.35V
3.0V to 4.35V
3.0V to 4.35V
3.0V to 4.35V
3.0V to 4.35V
Conditions/Comments
Power down mode
Standby Mode
High power mode
Medium power mode
Low power mode
Package Drawing
4 of 7
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
Prelim DS110228