RFSW6062 Datasheet, PDF (3/13 Pages) RF Micro Devices – Low Insertion High Isolation SP6T Switch

RFSW6062
Parameter
Specification
Unit Condition
Min Typ Max
824MHz Third Harmonic
-89 -86 dBc
2000MHz Second Harmonic
-97 -91 dBc
2000MHz Third Harmonic
-86 -78 dBc
Input IP3
Max Operational Input Power
Power Supply
71
dBm 2Ghz, 21dBm per tone, 1MHz spacing
32
dBm
VDD Supply Current
65 120 µA
CTL1, CTL2 – Control Voltage High 1.3
2.7
V
CTL1, CTL2 – Control Voltage Low 0
0.45 V
Control Current
5
µA
Switching Speed, One RF Port to
Another
2
5
us ^{10% to 90% RF}
Turn On Time
20
us Time for V_DD = 0V to part ON and RF = 90%
Power-up / Power-down Sequence and Operation Controls
Power-up / Power-down
Power-up
Power-down
Switching Ports
Sequence for Power-up and Power-down from Supply that is Connected to VDD Pin
Turn on VDD, then CTL1, CTL2, and CTL3 then (20µs or greater), apply RF signal
Turn off RF signal, then CTL1, CTL2, and CTL3, then turn off VDD
Turn off RF signal, then change CTL1, CTL2, and CTL3 state, then (5µs or greater). Turn on RF signal
Switch is controlled by CTL1, CTL2, and CTL3
Mode
RF1-ANT
RF2-ANT
RF3-ANT
RF4-ANT
RF5-ANT
RF6-ANT
CTL1
High
Low
High
Low
High
Low
CTL2
Low
High
High
Low
Low
High
CTL3
Low
Low
Low
High
High
High
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140821
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 13