RFPA1802 Datasheet, PDF (3/10 Pages) RF Micro Devices – Integrated Power Amplifier 1600MHz to 2000MHz

RFPA1802
Parameter
Band 3 Downlink Electrical
Specifications
Gain
ACLR 1
ACLR 2
PA Efficiency (PAE)
PA Current Drain
PA Quiescent Current
Noise Figure
Input Impedance
IM3
IM5
Harmonics 2f0
Harmonics 3f0
Enable Current
Mode Current
Leakage Current
DC Enable Time
RF Rise/Fall Time
Coupling Factor
Coupling Accuracy – Temp /
Voltage
Coupling Accuracy – VSWR
Output Load VSWR Stability
(Spurious Emissions)
Specification
Unit
Condition
Min Typ Max
Unless Otherwise Specified: Temp = 25°C, VBATT = +3.3V,
VEN = +1.8V, Freq = 1830MHz, 50Ω, 20MHz
LTE DL with 7.5dB CFR
25.5
20.5
11.5
18.5
-0.5
-0.8
28.5
23.5
14.5
-32
-50
-48
-60
25
294
119
80
38
3.3
1.8:1
-15
-20
-14
-27
0.1
0.1
20.5
31.5
26.5
17.5
2:1
5
10
10
22.5
0.5
0.8
-60
dB
dB
dB
dBc
dBc
dBc
dBc
%
mA
mA
mA
mA
dB
VSWR
dBm
dBm
dBm
dBm
mA
mA
µA
µs
µs
dB
dB
dB
dBc
High Power Mode (HPM), POUT = 24dBm, VCC = 3.3V
Medium Power Mode (MPM), POUT = 14dBm, VCC = 1.5V
Low Power Mode (LPM), POUT = 3dBm, VCC = 0.7V
HPM, POUT = 24dBm, VCC = 3.3V, without DPD
HPM, POUT = 24dBm, VCC = 3.3V, with DPD
HPM, POUT = 24dBm, VCC = 3.3V, without DPD
HPM, POUT = 24dBm, VCC = 3.3V, with DPD
HPM, POUT = 24dBm, VCC = 3.3V
HPM, POUT = 24dBm, VCC = 3.3V
HPM, VCC = 3.3V
MPM, VCC = 1.5V
LPM, VCC = 0.8V
No external matching, POUT ≤ 24dBm, all modes
Two tones passed 600kHz, HPM, Total POUT ≤ 24dBm, VCC = 3.3V
Two tones passed 600kHz, HPM, Total POUT ≤ 24dBm, VCC = 3.3V
CW POUT ≤ 24dBm, all power modes
CW POUT ≤ 24dBm, all power modes
Sources or sink current, VEN = 1.8V
Source or sink current, VMODE0, VMODE1 = 1.8V
DC only; VCC = VBATT = 4.5V, VEN = VMODE0 =VMODE1 = 0V
DC only; Time from VEN = high to stable idle current (90% of steady state
value)
POUT ≤ 24dBm, all modes, 90% of target, DC settled prior to RF
POUT ≤ 24dBm, all modes
POUT ≤ 24dBm, all modes 30°C ≤ T ≤ 85°C , VCC as required, referenced to
25°C, 3.3V conditions
POUT ≤ 24dBm, all modes, load VSWR = 2.5:1
POUT ≤ 24dBm, all conditions, load VSWR = 8:1, all phase angles
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150602
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 10