RFFM8200 Datasheet, PDF (3/13 Pages) RF Micro Devices – 2.4GHz TO 2.5GHz 802.11b/g/n WiFi FRONT END MODULE

RFFM8200
Parameter
Specification
Unit
Min. Typ. Max.
Condition
2.4GHz Transmit Parameters
(continued)
Power Detector
Voltage at P_OUT = 0dBm
0
0.15
0.2
V
V_CC = 3.3V
Voltage at P_OUT = 18dBm
0.6
0.7
0.8
V
V_CC = 3.3V
Voltage Target at 23dBm P_OUT 1.2
1.35
1.5
V
V_CC = 3.3V
Variation Over Phase
-1.5
1.5
dB up to 3:1 VSWR; 0 to 360° load pull; Temp=25°C
Current Consumption
I_CC
195
210
mA V_CC = 3.3V; Temp = 25°C
200
230
mA
Quiescent Current
160
200
mA “RF OFF”
FEM Leakage Current
2
10
A V_CC = 4.8V, RF OFF
Input Port Return Loss
9.6
12
dB
Output Port Return Loss
10
15
dB
Ruggedness
No Damage Conditions: max operating voltage, max
input power, max temperature
Output VSWR
10:1
All phase angles, no spurious or oscillations
Input Power
0
dBm
Stability
PA must be stable from 0dBm to 21dBm. CW Signal, No
spurs above -41.25dBm for non-harmonic related sig-
nals.
Output VSWR
4:1
All phase angles, no spurious or oscillations
Out-of-Band Emissions 2310MHz to
2390MHz and 2483.5MHz to
2500MHz (note 1)
-41.25
-41.25
dBm/MHz P_OUT = 17dBm, 54Mbps OFDM Modulation, 64QAM,
RBW = 1MHz, VBW = 100kHz, V_CC = 3.3V; Temp=25°C
dBm/MHz P_OUT = 20dBm, 11Mbps CCK Modulation, RBW = 1MHz,
VBW = 100kHz, V_CC = 3.3V; Temp=25°C
Harmonics
11b modulation, 1Mbps, BW = 1MHz; P_OUT = 21.5dBm
Second
-15
dBm 4.80GHz to 5.00GHz
Third
-45
-30
dBm 7.20GHz to 7.50GHz
Noise Power
at 2170MHz
-134
dBm/Hz Temp=25°C
Turn-on/off Time
200
600
nS Output from 10% to 90% of final gain
Note 1: The output power for channels 1 and 11 may be reduced to meet FCC restricted band requirements.
DS120713
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
3 of 13