RF6535 Datasheet, PDF (3/8 Pages) RF Micro Devices – 3.0V to 4.2V, 2.4GHz Front End Module

RF6535
Parameter
Transmit Parameters
(continued)
Current sourced through TXCT pin
Voltage drop from TXCT pin to
TXP/TXN
Receive Parameters
Frequency
Gain
Noise Figure
Current
Input IP3
Gain flatness
Input return loss
Output return loss
Balanced Output Impedance
Amplitude imbalance
Phase imbalance
Current sourced through RXCT pin
Voltage drop from RXCT pin to
RXP/RXN
Antenna Switch
RF-to-Control Isolation
RF-to-ANT Isolation
Specification
Min.
Typ.
Max.
2400
9.5
-0.5
6
7.5
-1
-15
50
17
11.5
3
8
7
8.5
200
20
18.0
0.1
2483
13.5
4
11
0.5
1
15
1
0.1
RF-to-RF Isolation
18
20
Antenna Select Switch Speed
Control Logic
Control Logic = HIGH
= V_CC -0.3
Control Logic = HIGH
1.7
1.8
Control Logic = LOW
0
Control Current. Logic HIGH
10
Control Current. Logic LOW
0.1
1
= V_CC
3.6
0.2
Unit
Condition
mA
V
MHz
dB
From antenna to RX pin (entire RX path).
dB
From antenna to RX pin (entire RX path).
mA
LNA + Switches
dBm
dB
dB
dB

dB
deg
mA
V
dB
Measured at any control pin while in TX or RX
mode.
dB
Measured from Antenna to RX port while in
Transmit mode. Measured from Antenna to TX
port while in Receive mode.
dB
Measured from TX port to RX port while in
receive or transmit modes.
uS
ANT1 or ANT2 path, TX or RX mode
V
SDN and ANT_SEL
V
CTL
V
All Logic I/O’s
A
All Logic I/O’s
A
All Logic I/O’s
DS121107
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
3 of 8