RF5322 Datasheet, PDF (3/12 Pages) RF Micro Devices – 3V TO 4.5V, 2.4GHz TO 2.5GHz LINEAR POWER AMPLIFIER

RF5322
Parameter
Specification
Unit
Min.
Typ.
Max.
Condition
Overall
Temperature=+25°C, V_CC=3.3V,
V_REG=2.8V pulsed at 1% to 100% duty cycle,
Frequency = 2450 MHz,
circuit per evaluation board schematic, unless
otherwise specified
Frequency cont.
2.40
2.50
GHz
IEEE802.11g
IEEE802.11n
ACP1
-35
-30
dBc
20dBm and 1Mbps
ACP2
-54
-50
dBc
20dBm and 1Mbps
Notes:
*The EVM specification is obtained with a signal generator that has an EVM floor of less than 0.7%.
**The PA must operate with gated bias voltage input at 1% to 99% duty cycles without any EVM or other parameter degradation.
Note 2: For best harmonic rejection please refer to the harmonic rejection application schematic.
DS110618
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
3 of 12