SBB3082S Datasheet, PDF (2/5 Pages) RF Micro Devices – InGaP HBT Active Bias Gain Block 50MHz to 6000MHz

SBB-3082S
Absolute Maximum Ratings
Parameter
Device Current (ID)
Device Voltage (VD)
RF Input Power
Junction Temperature (TJ)
Operating Temperature Range
Storage Temperature Range
Moisture Sensitivity Level
ESD Rating - Human Body Model (HBM)
Nominal Operating Parameters
Rating
100
6
+20
+150
-40 to +85
-55 to +150
Hermetic
Class 1C
Unit
mA
V
dBm
°C
°C
°C
Caution! ESD sensitive device.
RFMD Green: RoHS compliant per EU
Directive 2011/65/EU, halogen free per
IEC 61249-2-21, <1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Parameter
Specification
Unit
Min Typ Max
Condition
General Performance
Typical Performance with Bias Tees, VD = 5V with RDC = 20Ω, ID =
42mA, OIP3 Pout = 0dBm/tone, T = 25°C
Small Signal Gain
Output Power at 1dB Compression
OIP3
Input Return Loss
Output Return Loss
Reverse Isolation
Noise Figure
Operating Voltage
Operating Current
Thermal Resistance
15 16.4 21 dB Frequency Range 1.0GHz to 1.3GHz
15.4
dB 4GHz
14.5 15.1 18.5 dBm 1.150GHz
27.5 29.0
dBm F1 = 1150MHz, F2 = 1151MHz
17 21
dB 1.0GHz to 1.3GHz
14
dB 4GHz
17 25.0
dB 1.0GHz to 1.3GHz
13
dB 4GHz
17 19
dB 1.150GHz
4.0 5.0 dB 1.150GHz
4.2
V RDC = 20Ω, VS = 5.0 V
34
42
50
mA RDC = 20Ω, VS = 5.0 V
99
°C/W Junction to case
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS131119
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 5