SBB2089Z Datasheet, PDF (2/7 Pages) RF Micro Devices – 50MHz to 850MHz, CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER

SBB2089Z
Absolute Maximum Ratings
Parameter
Rating
Unit
Device Current (I_D)
Device Voltage (V_D)
RF Input Power
110
mA
5.5
V
24
dBm
Junction Temp (T_J)
Operating Temp Range (T_L)
Storage Temp
+150
°C
-40 to +85
°C
+150
°C
Power Dissipation
0.61
W
ESD Rating - Human Body Model
(HBM)
Class 2
Moisture Sensitivity Level
MSL2
Operation of this device beyond any one of these limits may cause permanent dam-
age. For reliable continuous operation, the device voltage and current must not
exceed the maximum operating values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
I_DV_D<(T_J-T_L)/R_TH, j-l and T_L=T_LEAD
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Typical RF Performance at Key Operating Frequencies (With Application Circuit)
Parameter
Unit 50MHz 70MHz 100 240 400
MHz MHz MHz
Small Signal Gain, S₂₁
Output Third Order Intercept Point, OIP₃
Output Power at 1dB Compression, P_1dB
Input Return Loss, IRL
dB
dBm
dBm
dB
20.0
40.0
20.0
15.0
20.0
40.0
20.0
18.0
20.0
41.0
20.0
19.0
20.0
42.0
20.0
20.0
20.0
41.0
20.0
20.0
Output Return Loss, ORL
dB
21.0
23.0
24.0
27.0
34.0
Reverse Isolation, S₁₂
Noise Figure, NF
dB
22.0
22.0
22.0
22.0
22.0
dB
3.1
2.9
2.7
2.6
2.7
Test Conditions: V_CC=5V I_D=90mA Typ. OIP₃ Tone Spacing=1MHz, P_OUT per tone=0dBm T_L=25°C Z_S=Z_L=50
Data on charts taken with Application Circuit
500
MHz
20.0
40.0
20.0
19.0
30.0
22.0
2.8
Noise Figure versus Frequency
P1dB versus Frequency
6.0
25.0
850
MHz
20.0
35.0
19.0
16.0
14.0
22.0
2.9
5.0
20.0
4.0
3.0
15.0
2.0
25C
1.0
-40C
85C
0.0
50.0
150.0 250.0 350.0 450.0 550.0 650.0 750.0 850.0
Frequency (MHz)
50.0
OIP3 versus Frequency
10.0
5.0
50.0
25C
-40C
85C
150.0 250.0 350.0 450.0 550.0 650.0 750.0 850.0
Frequency (MHz)
45.0
40.0
35.0
30.0
25.0
50.0
25C
-40C
85C
150.0 250.0 350.0 450.0 550.0 650.0 750.0 850.0
Frequency (MHz)
2 of 7
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS130718