SBB-5000 Datasheet, PDF (2/6 Pages) RF Micro Devices – 0.05GHz to 6GHz, CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER

SBB-5000
Preliminary
Absolute Maximum Ratings
Parameter
Rating
Unit
Total Current (I_D)
Device Voltage (V_D)
Power Dissipation
100
mA
5.5
V
0.55
W
Operating Lead Temperature (T_L)
RF Input Power
-40 to +85
°C
+12 (TBR)*
dBm
Storage Temperature Range
-55 to +150
°C
Operating Junction Temperature (T_J)
+150
°C
ESD Rating - Human Body Model
(HBM)
Class 1C
* TBR=To Be Reviewed
Operation of this device beyond any one of these limits may cause permanent dam-
age. For reliable continuous operation, the device voltage and current must not
exceed the maximum operating values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
I_DV_D<(T_J-T_L)/R_TH, j-l
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Typical Performance (GSG Probe Data with Bias Tees) V_D=5V, I_D=75mA, T=25°C, Z=50Ω
Parameter
Units 500MHz 1000MHz 1500MHz 2000MHz
Small Signal Gain
dB
20.5
20.5
20.5
20.5
Output 3rd Order Intercept Point
dBm
37.0
36.0
35.0
35.0
(see note 1)
Output Power at 1dB Compression
dBm
21.0
20.5
20.5
20.5
Input Return Loss
dB
27.0
21.0
17.0
15.0
Output Return Loss
dB
22.0
18.0
14.6
12.0
Reverse Isolation
dB
22.1
22.5
22.4
22.9
Noise Figure
dB
3.8
4.0
3.9
3.9
Note 1: 0dBm/tone, 1MHz spacing
3000 MHz
20.5
33.0
19.5
11.0
9.0
23.0
4.0
4000 MHz
20.0
30.0
17.0
9.5
7.2
23.0
3.8
2 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or techni-
cal support, contact RFMD at ([phone] or sales-sup-
EDS-106102 Rev A