SBA4089Z Datasheet, PDF (2/6 Pages) RF Micro Devices – DCto5GHz, CASCADABLE InGaP/GaAs HBT MMIC AMPLIFIER

SBA4089Z
Absolute Maximum Ratings
Parameter
Rating
Unit
Device Current (I_D)
Device Voltage (V_D)
RF Input Power
130
mA
6
V
+17
dBm
Junction Temp (T_J)
Operating Temp Range (T_L)
Storage Temp
+150
°C
-40 to +85
°C
+150
°C
Operating Dissipated Power
0.65
W
Moisture Sensitivity Level
MSL 2
Operation of this device beyond any one of these limits may cause permanent dam-
age. For reliable continuous operation, the device voltage and current must not
exceed the maximum operating values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
I_DV_D<(T_J-T_L)/R_TH, j-l and T_L=T_LEAD
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Typical Performance at Key Operating Frequencies
Parameter
Unit 100MHz 500MHz
850MHz 1950MHz 2400MHz
Small Signal Gain
dB
15.3
15.3
15.0
14.6
14.3
Output Third Order Intercept dBm
37.1
Point
36.2
36.5
33.5
32.7
Output Power at 1dB
dBm
Compression
19.0
19.1
19.0
19.0
18.3
Input Return Loss
dB
47
33
29
21
17.5
Output Return Loss
dB
22
22
21
15
13.3
Reverse Isolation
dB
18
18
18.7
19
19
Noise Figure
dB
4.1
4.3
4.2
4.8
-
Test Conditions: V_S=8V, I_D=80mA Typ., OIP₃ Tone Spacing=1MHz, P_OUT per tone=0dBm, R_BIAS=39, T_L=25°C, Z_S=Z_L=50
3500 MHz
13.2
30.5
16.3
13.3
12
19
-
Noise Figure vs Frequency
7.00
6.00
5.00
4.00
3.00
2.00
+25c
1.00
-40c
0.00
+85c
0
0.5
1
1.5
2
2.5
3
3.5
Frequency (GHz)
22
21
20
19
18
17
P1dB vs Frequency
OIP3 vs Frequency
40
38
36
34
32
30
28
26
+25c
24
-40c
22
+85c
20
0
0.5
1
1.5
2
2.5
3
3.5
Frequency (GHz)
+25c
-40c
+85c
16
15
0
0.5
1
1.5
2
2.5
3
3.5
Frequency (GHz)
2 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS111204