SBA4086Z Datasheet, PDF (2/6 Pages) RF Micro Devices – DCto5GHz, CASCADABLE InGaP/GaAs HBT MMIC AMPLIFIER

SBA4086Z
Absolute Maximum Ratings
Parameter
Rating
Unit
Device Current (I_D)
Device Voltage (V_D)
RF Input Power
130
mA
6
V
+17
dBm
Junction Temp (T_J)
Operating Temp Range (T_L)
Storage Temp
+150
°C
-40 to +85
°C
+150
°C
Operating Dissipated Power
0.65
W
Operation of this device beyond any one of these limits may cause permanent dam-
age. For reliable continuous operation, the device voltage and current must not
exceed the maximum operating values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
I_DV_D<(T_J-T_L)/R_TH, j-l and T_L=T_LEAD
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Typical Performance at Key Operating Frequencies
Parameter
Unit 100MHz 500MHz
850MHz 1950MHz 2400MHz
Small Signal Gain
dB
15.2
15.0
14.8
14.2
12.4
Output Third Order Intercept dBm
37.1
Point
36.3
36.5
33.5
32.7
Output Power at 1dB
dBm
Compression
19.0
19.1
19.1
19.0
18.3
Input Return Loss
dB
36
28
25
21
19.7
Output Return Loss
dB
21
21
21.0
20.5
19.6
Reverse Isolation
dB
18
18
18
18
19
Noise Figure
dB
4.7
4.7
4.6
4.8
4.9
Test Conditions: V_S=8V, I_D=80mA Typ., OIP₃ Tone Spacing=1MHz, P_OUT per tone=0dBm, R_BIAS=39, T_L=25°C, Z_S=Z_L=50
3500 MHz
12.1
29.7
16.4
17
20.2
20
5.0
NF vs Frequency
7.00
6.50
6.00
5.50
5.00
4.50
4.00
3.50
3.00
2.50
+25c
-40c
2.00
+85c
1.50
1.00
0
0.5
1
1.5
2
2.5
3
3.5
Frequency (GHz)
40
38
36
34
32
30
28
26
24
22
0
0.5
P1dB vs Frequency
21
19
17
15
+25c
-40c
13
+85c
11
0
0.5
1
1.5
2
2.5
3
3.5
Frequency (GHz)
IP3 vs Frequency
+25c
-40c
+85c
1
1.5
2
2.5
3
3.5
Frequency (GHz)
2 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS110708