S10040140P1 Datasheet, PDF (2/3 Pages) RF Micro Devices – GaAs Push Pull Hybrid 40MHz to 1000MHz

S10040140P1
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
Condition
General Performance
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
Power Gain
Slope^[1]
14.0
dB f = 50MHz
14.0
15.5 dB f = 1000MHz
0.5
1.5 dB f = 40MHz to 1000MHz
Flatness of Frequency Response
0.8 dB f = 40MHz to 1000MHz (peak to valley)
Input Return Loss
20.0
dB f = 40MHz to 160MHz
18.0
dB f = 160MHz to 870MHz
15.0
dB f = 870MHz to 1000MHz
Output Return Loss
20.0
dB f = 40MHz to 160MHz
18.0
dB f = 160MHz to 870MHz
15.0
dB f = 870MHz to 1000MHz
Noise Figure
4.5 5.5 dB f = 50MHz to 1000MHz
Total Current Consumption (DC)
250.0 260.0 mA
Distortion Data 40MHz to 750MHz
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
CTB
XMOD
-64 -60 dBc
-55
-51 dBc 112 ch. flat, VO = 46dBmV^[2]
CSO
-64 -60 dBc
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 112 analog channels, NTSC frequency raster: 55.25MHz to 745.25MHz, +46dBmV flat output level.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA.
Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA.
Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the
carrier being tested.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140219
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3