English
Language : 

RFVC1844 Datasheet, PDF (2/10 Pages) RF Micro Devices – 10.8GHz to 12.1GHz MMIC VCO with Fo/2 and Fo/4 Outputs
RFVC1844
Absolute Maximum Ratings
Parameter
VCC_OSC, VCC_DIG
VTUNE
Junction Temperature (TJ)
Continuous PDISS (TA = 85°C) (derate 37mW/°C above TA = 85°C)
Junction to Case, Thermal Resistance (Rθ(j-a))
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
Rating
+5.5
0 to +15
135
1.65
30
-65 to +150
-40 to +85
Class 1A
Nominal Operating Parameters
Parameter
Specification
Min Typ Max
Electrical Specifications
Operating Frequency
Fo
Fo/2
Fo/4
Output Power
Fo
Fo/2
Fo/4
SSB Phase Noise
10kHz offset at RFOUT
100kHz offset at RFOUT
Tune Voltage
Supply Current
VCC_OSC
VCC_DIG
Tune Port Leakage Current
Output Return Loss
10.8
12.1
5.4
6.05
2.7
3.03
7
9
-2
-88
-113
1.5
14.5
220
60
10
5
Unit
GHz
GHz
GHz
dBm
dBm
dBm
dBc/Hz
dBc/Hz
V
mA
mA
µA
dB
Condition
Unit
V
V
°C
W
°C/W
°C
°C
Caution! ESD sensitive device.
RFMD Green: RoHS compliant per EU
Directive 2011/65/EU, halogen free per
IEC 61249-2-21, <1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
VCC = 5V, TA = +25°C
VTUNE = 5V
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140428
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 10