RFSW8000 Datasheet, PDF (2/6 Pages) RF Micro Devices – 10W SPDT SWITCH

RFSW8000
Absolute Maximum Ratings
Parameter
Rating
Supply Voltage (RF Applied)
-0.5 to +5.0
Supply Voltage (No RF Applied)
-0.5 to +5.0
DC Supply Current
10
Input RF Power
+40*
Max Input Power, OFDM Modulated,
+36
3:1 Load VSWR
Operating Ambient Temperature
-40 to +85
Storage Temperature
-40 to +150
Moisture Sensitivity
MSL2
*Note: Maximum input power with a 50Ω load.
Unit
V
V
mA
dBm
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2011/65/EU, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Typical Conditions
Performance - Low Band
Frequency
Insertion Loss
Input P0.1dB
Input Return Loss
Isolation
Harmonics (2nd, 3rd)
IIP3
Performance - Mid Band
Frequency
Insertion Loss
Input P0.1dB
Input Return Loss
Isolation
Harmonics (2nd, 3rd)
IIP3
Performance - High Band
Frequency
Insertion Loss
Input P0.1dB RF1 to RFC
Input P0.1dB RF2 to RFC
Input Return Loss
Isolation
Harmonics (2nd, 3rd)
IIP3
Switching
Switching Speed High
Switching Speed Low
Specification
Min.
Typ.
Max.
100
39
20
26
2000
39
15
26
4500
35
37
14
24
0.4
40
25
29
80
59
0.55
40
20
29
80
59
0.85
36
38
20
25.5
80
55
300
100
2000
0.6
4500
0.65
0.95
6500
1
500
300
Unit
MHz
dB
dBm
dB
dB
dBc
dBm
MHz
dB
dB
dBm
dB
dB
dBc
dBm
MHz
dB
dBm
dBm
dB
dB
dBc
dBm
nSec
nSec
Condition
Temp = 25°C, VC = 3.0V unless otherwise
noted
Optimized at 700MHz to 950MHz
At higher V_CONTROL, P0.1dB will be improved
at P_OUT = 30dBm
Optimized at 2.1GHz to 2.7GHz
In optimized frequency band
in full frequency band
At higher V_CONTROL, P0.1dB will be improved
at P_OUT = 30dBm
Optimized at 5.1GHz to 5.9GHz
In optimized frequency band
At higher V_CONTROL, P0.1dB will be improved
At higher V_CONTROL, P0.1dB will be improved
at P_OUT = 30dBm
50% CTL to 90/10% RF
90/10% RF to 10/90% RF
2 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS130530