RFSW6223 Datasheet, PDF (2/8 Pages) RF Micro Devices – DPDT SYMMETRIC SWITCH

RFSW6223
Absolute Maximum Ratings
Parameter
Control Voltage (V1, V2)
Maximum RF Input Power, 3V, 10:1 VSWR
Maximum RF Input Power, 5V, 10:1 VSWR
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
ESD Rating - Human Body Model (HBM)
Moisture Sensitivity Level
Rating
7.0
33
34
-40 to +85
-40 to +150
+150
Class 1A
MSL 1
Unit
V
dBm
dBm
°C
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Specification
Unit
Min.
Typ.
Max.
Condition
General Performance
3.0V control voltage unless otherwise noted.
T=25°C, 100pF DC blocks.
Insertion Loss
0.60
dB
1 GHz
0.65
0.85
dB
2 GHz
0.70
dB
4 GHz
0.80
dB
6 GHz
Isolation (RF1/RF2 to RF3/RF4)
37
dB
1 GHz
28
33
dB
2 GHz
27
dB
4 GHz
22
dB
6 GHz
Isolation (RF1 to RF2, RF3 to RF4)
30
dB
1 GHz
24.5
dB
2 GHz
18.5
dB
4 GHz
16
dB
6 GHz
Return Loss
>20
dB
1 GHz
>20
dB
2 GHz
>20
dB
4 GHz
>20
dB
6 GHz
IP0.1dB
30.5
dBm
3.0V, 900MHz
35
dBm
5.0V, 900MHz
IP1dB
34
dBm
3.0V, 900MHz
IIP3
56
dBm
15dBm input power/tone, 5MHz tone spacing
IIP2
100
dBm
15dBm input power/tone, 5MHz tone spacing
2nd Harmonic
75
dBc
0.88GHz, +20dBm input power
90
dBc
2.44GHz, +20dBm input power
3rd Harmonic
83
dBc
0.88GHz, +20dBm input power
83
dBc
2.44GHz, +20dBm input power
T_ON, T_OFF
35
ns
50% V_CC to 10/90% RF, +10dBm input power
T_RISE, T_FALL
20
ns
10/90% RF, +10dBm input power
Power Supply
Control Voltage (V1, V2)
1.8
3.0
5.0
V
Recommended for continuous operation.
Control Current
5
A
3.0 V
Notes: User should optimize DC-blocking capacitors for the desired frequency of operation. For positive logic control, DC-blocking capacitors
are required on all RF ports.
2 of 8
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120319