English
Language : 

RFSW6023 Datasheet, PDF (2/10 Pages) RF Micro Devices – 25dB Isolation at 2GHz
RFSW6023
Absolute Maximum Ratings
Parameter
Supply Voltage (RF Applied)
Supply Voltage (No RF Applied)
DC Supply Current
Input Peak Envelope Power
Max Input Power, OFDM Modulated, 3:1 Load VSWR
Max Input 3:1 VSWR
Operating Ambient Temperature
Junction Temperature
Storage Temperature
Moisture Sensitivity Level
*Maximum input power with a 50Ω load.
Nominal Operating Parameters
Rating
-0.5 to +5.0
-0.5 to +5.0
10
+40*
+36
36
-40 to +85
150
-40 to +150
MSL2
Unit
V
V
mA
dBm
dBm
dBm
°C
°C
°C
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Parameter
Specification
Unit Condition
Min Typ Max
Low Band Performance
Temp = 25°C, VC = 3V, unless otherwise noted
Frequency Range
Insertion Loss
Input P0.1dB
Input Return Loss
Isolation
Harmonics (2nd, 3rd)
Input IP3
100
2000 MHz
0.4 0.7 dB
40
dBm
20
dB
25
dB 2000MHz
80
dBc At POUT = 30dBM, 880MHz
59
dBm 150MHz, 23dBm/tone
High Band Performance
Temp = 25°C, VC = 3V, unless otherwise noted
Frequency Range
Insertion Loss
2000
5000 MHz
0.6 0.8 dB
Input P0.1dB
Input Return Loss
Isolation
Harmonics (2nd, 3rd)
Input IP3
Control Voltage
40
dBm
15
dB
26
dB 3800MHz
80
dBc At POUT = 30dBM, 2140MHz
59
dBm 2000MHz, 23dBm/tone
Control Voltage High
Control Voltage Low
Control Current
2.5 3
5
V
0.2
V
5
µA
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS131111
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 10