RFSA4013 Datasheet, PDF (2/16 Pages) RF Micro Devices – TEMPERATURE COMPENSATING ATTENUATOR

RFSA4013
Absolute Maximum Ratings
Parameter
Supply Voltage (V_DD)
Mode Pin Voltage (MODE 1)
Mode Pin Voltage (MODE 2)
RF Input Power
Operating Temperature
Storage Temperature
Maximum Junction Temperature
ESD - Human Body Model (HBM)
Rating
-0.5 to +6.0
-0.5 to +6.0
-0.5 to +6.0
+30
-40 to +85
-65 to +150
+125
1000
Unit
V
V
V
dBm
°C
°C
°C
V
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Specification
Unit
Min.
Typ.
Max.
Condition
General
Supply Voltage (V_DD)
4.75
5
5.25
V
Supply Current
1
mA
Operating Temperature
-40
85
°C
Thermal Resistance
45
°C/W
RF Input Power
27
dBm
RF Performance
Frequency Range
50
6000
MHz
Attenuation Slope Mode1 = Low
Mode2 = High
0.043
dB/°C -40°C to 80°C
Attenuation Slope Mode1 = High
Mode2 = High
0.058
dB/°C -40°C to 80°C
Attenuation Slope Mode1 = High
Mode2 = Low
0.066
dB/°C -40°C to 80°C
Nominal +25°C Attenuation
Mode1 = Low Mode2 = High
5.4
dB
Nominal +25°C Attenuation
Mode1 = High Mode2 = High
6.35
dB
Nominal +25°C Attenuation
Mode1 = High Mode2 = Low
7.4
dB
Relative Phase
3
Deg
Insertion Phase at +25°C temperature relative
to max temperature
Return Loss
20
dB
Input 1dB Compression Point
30
dBm
Input IP3
45
55
dBm
P_IN + (IM3_dBC/2)
Input IP2
85
dBm
P_IN + IM2_dBC, IM2 is F1 + F2
Input IH2
87
dBm
P_IN + H2_dBC, H2 is Second Harmonic
Input IH3
59
dBm
P_IN + (H3_dBC/2), H3 is Third Harmonic
Power Supply
MODE pin Logic Low
+0.4
V
MODE pin Logic High
1
V
NOTE: Typical performance at nominal conditions unless otherwise noted: Supply voltage = 5.0V, Operating temperature = 25°C, RF frequency
2GHz
2 of 16
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS111221