RFRX1701 Datasheet, PDF (2/7 Pages) RF Micro Devices – GaAs MMIC IQ Downconverter 17.7GHz to 26.5GHz

RFRX1701
Absolute Maximum Ratings
Parameter
LNA Drain Voltage (VD)
LOA Drain Voltage (VD)
RF Input Power
LO Input Power
TOPER
TSTOR
ESD Human Body Model
Nominal Operating Parameters
Rating
6
6
10
15
-40 to +85
-65 to +150
Class 1A
Unit
V
V
dBm
dBm
°C
°C
Caution! ESD sensitive device.
RFMD Green: RoHS compliant per EU
Directive 2011/65/EU, halogen free per
IEC 61249-2-21, <1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Parameter
Specification
Unit Condition
Min Typ Max
General Performance
RF Frequency
17.7
26.5 GHz
LO Frequency
6.85
15.25 GHz
IF Frequency
DC
4.0 GHz
LO Input Drive
+5
dBm
Conversion Gain
13
dB
NF (17.7GHz to 19.7GHz)
2.5
dB
NF (21.2GHz to 23.6GHz)
2.7
dB
NF (24.5GHz to 26.5GHz)
2.9
dB
IIP3
6
dBm
Image Rejection
15
dB
LO-RF Isolation
40
dB
LO-IF Isolation
15
dB
LO Return Loss
12
dB
RF Return Loss
12
dB
VD
3 to 5
V
ID
350
mA
NOTES: Measurements performed on part soldered on evaluation board with SMA connectors and IF ports connected to an external 90° Hybrid Combiner
and LO Power of +5dBm and at 25°C, unless otherwise stated.
IF = 2.5GHz, RF Power = -20dBm, IIP3 is measured with a 2-tone input of -23dBm power for each tone and Δf = 10MHz, Vd1 = 3V, Vd2 = 4V, Vd3 through
Vd5 = 5V, MixerBias = 0V
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS131025
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 7