RFRP2241 Datasheet, PDF (2/4 Pages) RF Micro Devices – 5MHZ TO 100MHZ 30DB REVERSE HYBRID (LOW CURRENT, LOW NOISE)

DRAFT
RFRP2241
DRAFT
Absolute Maximum Ratings
Parameter
RF Input Voltage (single tone)
DC Supply Over-Voltage (5 minutes)
Storage Temperature
Operating Mounting Base Temperature
Rating
65
30
-40 to +100
-30 to +100
Unit
dBmV
V
°C
°C
Caution! ESD sensitive device.
RoHS (Restriction of Hazardous
Substances): Compliant per EU Directive
2011/65/EU.
Nominal Operating Parameters
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Parameter
Specification
Unit Condition
Min Typ Max
General Performance
Operating Frequency Range
VB= 24V; TMB=30°C; ZS=ZL=75Ω
5
100 MHz
Power Gain
Slope ^[1]
Flatness of Frequency Response
29.5 30.0 30.5 dB f=5MHz
29.3 30.1
dB f=100MHz
-0.2 0.1 0.5 dB f=5MHz to 100MHz
±0.3 dB f=5MHz to 100MHz
Input Return Loss
Output Return Loss
Noise Figure
-20
dB f=5MHz to 100MHz
-20
dB f=5MHz to 100MHz
2.5 3.0 dB f=100MHz
Total Current Consumption (DC)
125.0 130.0 135.0 mA
Distortion data 5MHz to 100MHz
CTB
XMOD
CSO
VB= 24V; TMB=30°C; ZS=ZL=75Ω
-66
-64 dBc 7 ch. flat; VO=50dBmV ^[2]
-61 dBc 12 ch. flat; VO=50dBmV ^[3]
-57
-55 dBc 7 ch. flat; VO=50dBmV ^[2]
-51 dBc 12 ch. flat; VO=50dBmV ^[3]
-70
-68 dBc 7 ch. flat; VO=50dBmV ^[2]
-68 dBc 12 ch. flat; VO=50dBmV ^[3]
DRAFT DRAFT ^{RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421}
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS130906
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3