RFPP2870 Datasheet, PDF (2/3 Pages) RF Micro Devices – 28dB Push Pull Hybrid 40MHz to 1003MHz

RFPP2870
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
Condition
General Performance
Power Gain
Slope^[1]
Flatness of Frequency Response
Input Return Loss
Output Return Loss
Noise Figure
Total Current Consumption (DC)
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
27.0
dB f = 50MHz
28.0 28.5 29.0 dB f = 1003MHz
0.5
1.0 2.0 dB f = 40MHz to 1003MHz
0.8 dB f = 40MHz to 1003MHz (peak to valley)
-20
dB f = 40MHz to 320MHz
-19
dB f = 320MHz to 640MHz
-18
dB f = 640MHz to 870MHz
-17
dB f = 870MHz to 1003MHz
-20
dB f = 40MHz to 320MHz
-19
dB f = 320MHz to 640MHz
-18
dB f = 640MHz to 870MHz
-17
dB f = 870MHz to 1003MHz
4.5 5.0 dB f = 50MHz to 1003MHz
250.0 270.0 mA
Distortion Data 40MHz to 550MHz
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
CTB
-70 -64 dBc
XMOD
CSO
-65
-60 dBc _{VO = 46dBmV, flat, 79 analog channels plus 75 digital channels (-6dB}
-75
-66
dBc ^{offset)[2][4]}
CIN
65
70
dB
Distortion Data 40MHz to 750MHz
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
CTB
XMOD
-70
dBc
-63
dBc VO = 44dBmV; 112 analog channels flat^[3][4]
CSO
-72
dBc
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 79 analog channels, NTSC frequency raster: 55.25MHz to 547.25MHz, +46dBmV flat output level, plus 75 digital channels, -6dB offset relative to the
equivalent analog carrier.
3. 112 analog channels, NTSC frequency raster: 55.25MHz to 745.25MHz, 44dBmV flat output level.
4. Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA. Composite Triple Beat (CTB) - The
CTB parameter is defined by the NCTA. Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method),
referenced to 100% modulation of the carrier being tested. Carrier to Intermodulation Noise (CIN) - The CIN parameter is defined by ANSI/SCTE 17 (Test
procedure for carrier to noise).
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140219
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3