RFOS501X Datasheet, PDF (2/4 Pages) RF Micro Devices – 5MHz to 85MHz Si OPTICAL RECEIVER

RFOS501X
Absolute Maximum Ratings
Parameter
Rating
Unit
Caution! ESD sensitive device.
Frequency Range
Optical Input Power (continuous)
ESD Sensitivity (Human Body Model;
R=1.5k, C=100pF)
5 to 85
0
500
MHz
dBm
V
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
Storage Temperature
-40 to +85
°C
The information in this publication is believed to be accurate and reliable. However, no
Operating Mounting Base Tempera-
ture
-20 to +85
°C
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
S _{Handling: Fiberglass optical coupling: maximum tensile strength=5N, minimum bending radius=35mm.}
N _Parameter
Specification
Min.
Typ.
Max.
Unit
Condition
IG ^{Distortion data}
Second order distortion^[3]
-70.0
dBc
f_m = 54.25 MHz
S Third order distortion^[4]
-70.0
dBc
f_m = 55.25 MHz
3. The single second beat distortion (SSO) is measured using a two laser test. Each laser is modulated wiht a single tone at 13.3% OMI. The total optical
E ^{power into the DUT is -10dBm (0.1mW) f1=20.25MHz; f2=34.00MHz; measurement at f1+f2.}
4. The single triple beat distortion (STB) is measured using a three laser test. Each laser is modulated with a single tone at 13.3% OMI. The total optical
D ^{power into the DUT is -10dBm (0.1mW). f1=76.25MHz; f2=64.25MHz; f3=85.25MHz; measurement at f1+f2-f3.}
Cable Lengths and Connector Types
Type
RFOS5012
Inches
33.4
W_{Dimension A}
E_Tolerance
mm
N^{-4 to +0.5}
848
NOT ^{FOR RFOS5013}
33.4
-4 to +0.5
848
Tolerance
-102 to +13
-102 to +13
Optical Connector
Type
FC/APC
SC/APC
2 of 4
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS130415