English
Language : 

RFLA1022 Datasheet, PDF (2/17 Pages) RF Micro Devices – Low Noise, High Linearity Amplifier 400MHz to 1500MHz
RFLA1022
Absolute Maximum Ratings
Parameter
Supply Voltage
Control Voltage
DC Supply Current
Power Dissipation
Max RF Input Power
Storage Temperature
ESD Rating (HBM)
Moisture Sensitivity Level
Rating
+5.5
+5.5
230
1.25
32
-40 to +150
250
MSL1
Unit
VDC
VDC
mA
W
dBm
°C
V
Recommended Operating Condition
Parameter
Operating Temperature Range
Operating Junction Temperature
Supply Voltage
Specification
Min
Typ
Max
-40
+85
150
51
32
Notes
1.
2.
5V Operation
3V Operation
Unit
°C
°C
V
V
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Parameter
Specification
Min Typ Max
LNA Performance
Frequency Range
Gain (On Mode)
Noise Figure
Input P1dB
Input IP3
Gain (Off Mode)
Input Return Loss
Output Return Loss
400
1500
17.5
0.45
5.5
27
10
-16
-15
LNA Performance
Frequency Range
400
1500
Unit Condition
Temp = 25°C, VCC = 5V, 140mA, 880MHz, Standard Application
Circuit
MHz
dB SD = 5V
dB
dBm
dBm
dB SD = 0V
dB
SD = 5V
dB
Temp = 25°C, VCC = 3V, 80mA, 880MHz, Standard Application
Circuit
MHz
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140616
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 17