RFFM8204 Datasheet, PDF (2/8 Pages) RF Micro Devices – 2.4GHz TO 2.5GHz 802.11b/g/n WiFi FRONT END MODULE

RFFM8204
Absolute Maximum Ratings
Parameter
DC Supply Voltage (No RF Applied)
DC Supply Current
Operating Case Temperature
Storage Temperature
Maximum TX Input Power
Maximum RX Input Power
Moisture Sensitivity
Rating
6
500
-40 to +85
-40 to +150
+10
+5
MSL1
Unit
V
mA
°C
°C
dBm
dBm
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Parameter
Operating Frequency
Operating Temperature
Extended Operating Temperature
Storage Temperature
Power Supply V_CC
Extended V_CC
Control Voltage-high
Control Voltage-low
Transmit (TX-ANT)
Dynamic EVM - Nominal
Dynamic EVM
Output power meeting Spectral Mask
TX Port Return Loss (S11)
ANT Port Return Loss
Nominal Gain
Gain
Gain Flatness - 20 MHz Channel
Gain Flatness - 40 MHz Channel
Gain Flatness - 100 MHz Band
Out of Band Rejection
Operating Current
Quiescent Current
PA_Enable Current
Leakage Current
Second Harmonic
Third Harmonic
Power Detector Voltage
Power Detector Voltage
P_DETECT Variation from 0-360 load pull
Specification
Min. Typ. Max. Unit
Condition
2.412
-10
-40
-40
3.3
3
2.8
23
22
-0.5
-0.75
-1
4
0.1
1.0
-1.5
2.442
+25
+25
+25
3.7
3.7
3.7
0
2.5
2.5
21
-10
-12
24
24
7
185
135
30
1
-23
-50
0.15
1.25
2.484
+70
+85
150
4.35
4.8
V_CC
0.2
3
3
22
-8
-10
27
28
0.5
0.75
1
210
160
50
10
-18
-41
0.2
1.5
1.5
GHz
ºC
ºC Functional with derated performance
ºC
V
Recommended operating voltage range
V
Functional with derated performance
V
PA_EN, CR_X, C_BT
V
T = -10ºC to +70ºC; V_CC = 3.3V to 4.35V;
PA_EN = high, CR_X = C_BT = low; 50% duty cycle;
frequency = 2.412GHz to 2.484GHz, measured with
a standard IEEE802.11g waveform unless otherwise
noted.
%
T = 25ºC, V_CC = 3.3v, P_OUT = 19dBm
%
P_OUT = 18dBm
dBm 11 Mbps CCK, +/- 11MHz offset from carrier
dB 50Ω characteristic impedance
dB
dB T = 25ºC, V_CC = 3.3v
dB
dB
dB
dB
dBc 2110MHz to 2170MHz, T = 25ºC, V_CC = 3.3v,
frequency = 2.412GHz
mA P_OUT = 18dBm
mA
A
A
V_CC = 4.8v, RF OFF
dBm/MHz 4.80GHz to 5.00GHz
dBm/MHz 7.20GHz to 7.50GHz
V
P_OUT = 0dBm
V
P_OUT = 22dBm
dB 3:1 VSWR
2 of 8
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120625