RFFM7600 Datasheet, PDF (2/12 Pages) RF Micro Devices – 5.0V, 2.5GHz TO 2.7GHz HIGH POWER FRONT END MODULE

RFFM7600
Absolute Maximum Ratings
Parameter
Supply Voltage (RF Applied)
Supply Voltage (No RF Applied)
DC Supply Current
A Input RF Power
Operating Ambient Temperature
Storage Temperature
Moisture Sensitivity
*Maximum Input Power with a 50 load.
Rating
-0.5 to +5.25
-0.5 to +6.0
1000
+10*
-30 to +85
-40 to +150
MSL3
Unit
V
V
mA
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Typical Conditions
Frequency
Output Power
ACP (adjacent Channel)
EVM
Operating Current
Quiescent Current
Frequency
Output Power
ACP (adjacent Channel)
EVM
Operating Current
Quiescent Current
TX Other
2nd Harmonic
3rd Harmonic
Frequency
802.16e Output Power
EVM
Gain
Gain Variation
Gain in Low Gain/Power Mode
Operating Current
Quiescent Current
2nd Harmonic
3rd Harmonic
Specification
Min. Typ. Max.
2570
2620
24
2500
24.5
-48
700
575
-45
3
2700
23
24
-48
-41
3
700
575
-45
-38
-50
2500
2700
27
2.5
3
32
34
-2
2
15
825
575
-43
-50
Unit
Condition
MHz
dBm
dBc
%
mA
mA
MHz
dBm
dBc
%
mA
mA
dBm/MHz
dBm/MHz
MHz
dBm
%
dB
dB
dB
mA
mA
dBm/MHz
dBm/MHz
T = 25°C, V_CC = 5V, V_REG = 2.85V, P_DOWN = 2.85V;
LTE Band 38
Compliance: LTE Downlink; using a 20MHz, LTE DL
ETM1.1 waveform, unless otherwise noted.
At rated P_OUT
At P_OUT = 24dBm
LTE Band 41
Compliance: LTE Downlink; using a 20MHz, LTE DL
ETM1.1 waveform, unless otherwise noted.
At rated P_OUT
At P_OUT = 24dBm
Compliance: LTE Downlink; using a 20MHz, LTE DL
ETM1.1 waveform, unless otherwise noted.
At rated P_OUT
Compliance: IEEE802.16e, using a 10MHz,
IEEE802.6e waveform, unless otherwise noted.
25°C 10MHz 802.16e mask
V_REG2 = 0V
Over all conditions
2 of 12
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120427