RFFM6901 Datasheet, PDF (2/13 Pages) RF Micro Devices – 2.8V TO 4.2V, 915MHZ ISM BAND TRANSMIT/ RECEIVE MODULE WITH DIVERSITY SWITCH

RFFM6901
Absolute Maximum Ratings
Parameter
Voltage
Storage Temperature Range
Operating Temperature Range
Maximum Input Power to PA, pin 30, 2 (no damage)
Maximum Input Power to PA, pin 26(no damage)
Maximum Input Power to LNA, pin 19, 21 (no
damage)
Moisture Sensitivity Level
Rating
5.25
-40 to +150
-40 to +85
+5
+23
+10
MSL3
Unit
V_DC
°C
°C
dBm
dBm
dBm
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RoHS (Restriction of Hazardous Substances): Compliant per EU Directive
2002/95/EC.
Parameter
Overall
Active Frequency
RF Port Impedance
ESD, Human Body Model
ESD, Charge Device Model
PA Section
Transmit Mode 4V (High Voltage)
Specification
Min. Typ. Max.
868 902 to
928
50
500
500
500
500
Power Supply Operation Voltage-High
3.8
4
4.2
Input Power
0
5
CW Output Power-near saturation (ANT1) at
31
31.5
4.0V
CW Output Power-near saturation (ANT2) at
31
31.5
4.0V
Output Power (ANT1) at 4.0V
30
30.5
Output Power (ANT2) at 4.0V
30
30.5
Thermal Resistance
39.83
1W Current (ANT1) at 4.0V at P_OUT = 30dBm
600
700
1W Current (ANT2) at 4.0V at P_OUT = 30dBm
600
700
1/2W Current (ANT1) at 4.0V at P_OUT =
27dBm
415
450
490
1/2W Current (ANT2) at 4.0V at P_OUT =
27dBm
415
450
490
1/4W Current (ANT1) at 4.0V at P_OUT =
24dBm
310
340
370
1/4W Current (ANT2) at 4.0V at P_OUT =
24dBm
310
340
370
Large Signal Gain Overall High Bias (ANT1)
27
30
33
at 4.0V
Unit
Condition
MHz PA and LNA

V RF Pins
V All Other Pins
V RF Pins
V All Other Pins
V
dBm
dBm
TXRX_SEL Logic = LOW, P_IN = 0dBm at pin 30,
V_CC DIG and Logic signals may be applied in
any order
PA V_CC
Pin 30
dBm
dBm
dBm
C°/W
mA
mA
mA
V_CC = V_DIG = 4.0V, LNAV_CC = GND, CTL1 =
CTL4 = CTL5 = 3.8V, CTL2 = CTL3 = 0V, P_OUT
= 30.1dBm, Modulation = CW, Freq =
902MHz, DC = 100%, T = 85°C
mA
mA
mA
dB
2 of 13
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120803