RFFM6500 Datasheet, PDF (2/9 Pages) RF Micro Devices – 2.7V to 4.2V, 168MHz to 171MHz ISM Band Transmit/Receive Module

RFFM6500
RFMD + TriQuint = Qorvo
Absolute Maximum Ratings
Parameter
Voltage
Storage Temperature Range
Operating Temperature Range
Maximum Input Power to PA, pin 32 (no damage)
Maximum Input Power to Antenna Port, pin 19
Moisture Sensitivity Level
Nominal Operating Parameters
Rating
5.25
-40 to +150
-40 to +85
+5
+10
MSL3
Unit
V_DC
°C
°C
dBm
dBm
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of antimony
trioxide in polymeric materials and red
phosphorus as a flame retardant, and
<2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Parameter
Specification
Unit
Min Typ Max
Condition
Overall
Active Frequency
RF Port Impedance
ESD, Human Body Model
ESD, Human Body Model
ESD, Charge Device Model
ESD, Charge Device Model
168 169.5 171 MHz
50
Ω
500
V RF Pins
500
V All Other Pins
500
V RF Pins
500
V All Other Pins
Leakage Current
VCC = 3.6V, CTL1 = 2.8V, CTL2 = 2.8V, VREG = 2.8V,
Temperature = 25°C
I_CC
1
5
µA
Transmit Mode
VCC = 3.6V, CTL1 = CTL2 = VREG = 2.8V,
Temperature = 25°C
Power Supply Voltage
Input Power
Output Power
Thermal Resistance
Operating Current
Large Signal Gain
2.7
3.6
4.2
V
PA V_CC
0
5
dBm Pin 32
25
27
dBm Over all rated voltage and temperature conditions
26.28
C°/W 4V V_CC, 100% Duty, 27dBm P_OUT, T_REF = 85° C
325
400
mA P_OUT = 27dBm, V_CC = 3.6V, Temperature = 25°C
27
30
dB
Power Control Range
1.4
2.0
Module PAE (Power Added Efficiency)
2nd Harmonic
3rd to 10th Harmonic
Input Return Loss
2.0
V
P_OUT = +7dBm to +27dBm
2.8
V
P_OUT = +24.0dBm to +27.5dBm
43
% V_CC = 3.6V, V_REG = 2.8V, P_OUT = 27dBm (takes into account filter and
switches)
-70
-67 dBc
-85
-72 dBc
-10
dB Measured at PA-IN Port at Pin 32
Revision DS20150622
© 2015 RF Micro Devices, Inc.
2 of 9
Disclaimer: Subject to change without notice
www.rfmd.com / www.qorvo.com