RFFM6204 Datasheet, PDF (2/9 Pages) RF Micro Devices – 2.0V to 4.0V, 2.4GHz Front End Module

RFFM6204
Absolute Maximum Ratings
Parameter
Voltage
Operating Temperature
Storage Temperature
Maximum Input Power to PA
Maximum Input Power to LNA
ESD, HBM
ESD, CDM
Moisture Sensitivity
Rating
4.5
-40 to +125
-40 to +150
+20
+5
1000
1000
MSL 3
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
TX Frequency
RX Frequency
Bypass Frequency
ANT RF Port Impedance
Balanced RF Port Impedance
VBAT
Current Source through CT pin
CT pin resistance to RFP/RFN
Off Mode Current - Leakage
Supply Current - IDDTX
Supply Current – IDDRX
C_RX Current
C_TX Current
C_BYP Current
Transmit Mode - Power
Amplifier
Input Return Loss
Output Return Loss
Gain
Gain Flatness
2405
2405
2405
50
100
2.0
3.0
30
2485
2485
2485
4.0
24.0
MHz
MHz
MHz
Ω
Ω
V
mA
Ω
50
nA
50
nA
1.0
nA
1.0
nA
1.0
nA
10.0
dB
8.0
dB
13.0
dB
-0.3
0.3
dB
Unit
V
°C
°C
dBm
dBm
V
V
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of antimony
trioxide in polymeric materials and red
phosphorus as a flame retardant, and
<2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Condition
Specifications must be met across supply voltage,
control voltage, and temperature ranges unless
otherwise specified
VDD_TX = 3.0V, C_EN = Low, VDD _RX = 3.0V,
C_TX = Low, C_RX = Low, C_BYP = Low, Temp =25°C
VDD _TX = 3.0V, C_EN = High, VDD _RX = 3.0V,
C_TX =High, C_RX =Low, C_BYP =Low, Temp =25°C
unless otherwise specified
Pins 3, 4 (RFN, RFP) 100 Ω differential
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS140808
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 9