RFFM4501 Datasheet, PDF (2/11 Pages) RF Micro Devices – 3.0V TO 5.0V, 4.9GHz TO 5.85GHz 802.11a/n/ac FRONT END MODULE

RFFM4501
Absolute Maximum Ratings
Parameter
DC Supply Voltage (No RF)
DC Supply Voltage (With RF On)
Maximum Tx Input Power
(No Damage)
Maximum Rx Input Power for
Bypass and Rx Gain Modes
(No Damage)
Operating Ambient Temperature
Extended Temperature Range
Storage Temperature
Moisture Sensitivity
Rating
5.5
5
+10
+10
-10 to +70
-40 to -10
-40 to +150
MSL3
Unit
V_DC
V_DC
dBm
dBm
°C
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2011/65/EU, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Typical Conditions 3.3V
Tx Performance - 11a/n/ac
Frequency
802.11n Output Power
11n Dynamic EVM
802.11ac Output Power
11ac Dynamic EVM
Tx Performance - Spectral Mask
802.11n/ac Output Power
Frequency
802.11n Output Power
11n EVM
Second Harmonic
Third Harmonic
General Tx Performance
Gain
Gain variation over Temp
Power Detect Voltage
Power Detect Accuracy
Specification
Min. Typ. Max.
5150
5850
16.5
17
2.5
3
-32
-30.5
15
16
1.8
-35
Unit
Condition
MHz
dBm
%
dB
dBm
%
dB
Temperature = -10°C to +70°C, V_CC = 3.3V,
PA_EN = high, P_OUT = 17dBm using a
IEEE802.11n MCS7 waveform unless otherwise
noted.
Compliance with standard 802.11a/n/ac
802.11n HT20 and HT40 MCS7
802.11ac HT40 and HT80 MCS9
19
dBm Meet IEEE802.11n (HT40, HT20 MCS7, and HT80
MCS9) spectral masks
4900
5150
MHz
16
17
dBm 802.11n HT20 and HT40 MCS7
2.5
3
%
-32
-30.5
dB
-45
-41 dBm/MHz 4.9GHz to 5.825GHz, P_OUT = 18dBm, 6Mbps
-50
-43 dBm/MHz ^802.11a
24
26
30
26
28
31
-2
2
0.35 0.375
0.4
0.70
0.75
0.8
-1.5
1.5
dB 5.15GHz to 5.35GHz
dB 5.35GHz to 5.825GHz
dB
V RF = off
V
P_OUT = 17dBm
dB Into 3:1 VSWR load, T = 25°C
2 of 11
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS130510