RFFM4204 Datasheet, PDF (2/9 Pages) RF Micro Devices – WiFi 802.11b/g/n/ac Front End Module 2.4GHz to 2.5GHz

RFFM4204
Absolute Maximum Ratings
Parameter
Supply Voltage (RF Applied)
Supply Voltage (No RF Applied)
DC Supply Current
Input RF Power (TX and RX) No damage
Operating Temperature
Storage Temperature
Moisture Sensitivity
*Maximum Input Power with a 50Ω load.
Rating
-0.5 to +5.5
-0.5 to +6.0
1000
+10*
-40 to +85
-40 to +150
MSL3
Nominal Operating Parameters
Parameter
Specification
Min
Typ
Max
Compliance
DC Operating Conditions
Power Supply
ENABLE Voltage - High
ENABLE Voltage - Low
Control Voltage - High
Control Voltage - Low
Transmit Performance
5
5.25
2.8
3.0
VCC – 0.2
0
0.2
2.8
3.0
VCC – 0.2
0
0.2
Frequency
802.11n Output Power
802.11n Dynamic EVM
2412
24
25
802.11ac Output Power
802.11ac Dynamic EVM
23
24
Second Harmonic
-30
Third Harmonic
-33
Spectral Mask
25
HT20/HT40 Output Power
Gain
31
34
Gain variation
-2.5
Power Detector Voltage Range
0.15
Power Detector Nominal Voltage
0.6
Input Return Loss
9
10
Output Return Loss
7
8
Operating Current
350
450
450
Quiescent Current
175
2484
3
-30.5
1.8
-35
-25
-25
2.5
1
550
600
Unit
V
V
mA
dBm
°C
°C
Unit
V
V
V
V
V
MHz
dBm
%
dB
dBm
%
dB
dBm/MHz
dBm/MHz
dBm
dB
dB
V
V
dB
dB
mA
mA
mA
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Condition
802.11b, 802.11g, 802.11n, 802.11ac
Operating Voltage for VCC (PA) and VDD (LNA)
PA_EN; LNA_EN
C_TX, C_RX
T= 25°C, VCC= 5.0V, Control voltage= 3V,
unless otherwise noted
HT20 and HT40
HT40
POUT = 26dBm 11b 11Mbps CCK Modulation
MCS0; CCK 11Mbps
At rated POUT
Over temperature of -10°C to +70°C
POUT = 0dBm to 29dBm
At rated 11ac POUT
In specified frequency band
POUT = 24dBm
POUT = 24dBm, over temp
VCC = 5.0V, PA Enable = 3V, and RF = OFF
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS141017
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 9