RFFM4201 Datasheet, PDF (2/14 Pages) RF Micro Devices – 3.3V TO 5V, 2.4GHz TO 2.5GHz HIGH POWER FRONT END MODULE

RFFM4201
Absolute Maximum Ratings
Parameter
Supply Voltage (RF Applied)
Supply Voltage (No RF Applied)
DC Supply Current
Input RF Power
Operating Temperature
Storage Temperature
Moisture Sensitivity
*Maximum Input Power with a 50 load.
Rating
-0.5 to +5.25
-0.5 to +6.0
750
+10*
-30 to +85
-40 to +150
MSL3
Unit
V
V
mA
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Typical Conditions
Frequency
Tx Performance - 11g/n
802.11n Output Power
11n Dynamic EVM
802.11n Output Power
11n Dynamic EVM
802.11g Output Power
11g Dynamic EVM
Second Harmonic
Third Harmonic
Tx Performance - Spectral Mask
802.11b Output Power
802.11n Output Power
Tx Performance - Generic
Gain
Gain Variation over Temp
Low Gain Mode - Gain Reduction
Power Detect Range
Power Detect Voltage
Input Return Loss - TX_IN pin
Output Return Loss at ANT pin
Operating Current
Quiescent Current
PAE (Power Added Efficiency)
I_REG
P_DOWN Current - V_REG supply
P_DOWN Current - V_CC Supply
Leakage Current
Power Supply - V_CC
Specification
Min. Typ. Max.
2412
25
25.5
25.5
2.5
25.8
2.5
26
2.5
-47
-50
27.5
25
2484
3
3
3
-42
-42
Unit
Condition
T = 25°C, V_CC = 5.0V, V_REG = 2.9V, using an
IEEE802.11g waveform, 54MBps, unless other-
wise noted
MHz
Compliance with standard 802.11g/n
dBm 802.11n HT20 and HT40 MCS7
%
dBm At V_CC = 5.25V; 802.11n HT20 and HT40 MCS7
%
dBm 802.11g 64QAM 54Mbps
%
dBm/MHz 11n HT40 MCS0/7. At rated P_OUT
dBm/MHz 11n HT40 MCS0/7. At rated P_OUT
Compliance with standard 802.11b/n
dBm Meet 802.11b 1MBps Mask Spec
dBm Meet 802.11n HT20/HT40 MCS7 Mask
31.5
0.125
10
6
34
23
1.45
15
8
435
160
20
4
7
0.5
0.2
5
37
+/-2.5
2.3
500
210
8.5
10
1
0.6
5.25
dB At rated P_OUT
dB Over temerature of -40 °C to +85 ˚C
dB Drop in gain versus high gain mode by setting
V_REG2 = 0
V
P_OUT = 5dBm to 30dBm
V
At rated P_OUT
dB In specified frequency band
dB In specified frequency band
mA At rated P_OUT
mA V_CC = 5.0, V_REG = 2.9V and RF = OFF
%
At rated P_OUT (PA only)
mA in Tx mode
mA P_DOWN = 0V, V_REG = 2.9V, V_CC = 5V
mA P_DOWN = 0V, V_REG = 2.9V, V_CC = 5V
mA V_CC = 5V, V_REG = 0V, P_DOWN = 0V
V
2 of 14
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS121008