RFCM4363 Datasheet, PDF (2/8 Pages) RF Micro Devices – 45-1218MHZ GAAS/GAN PUSH PULL MODULE

RFCM4363
Absolute Maximum Ratings
Parameter
RF Input Voltage (single tone; on evaluation board)
DC Supply Over-Voltage (5 minutes)
Storage Temperature
Operating Mounting Base Temperature
Moisture Sensitivity Level IPC/JEDEC J-STD-20
Rating
70
30
-40 to +100
-30 to +110
MSL 3 @260
Unit
dBmV
V
°C
°C
°C
Caution! ESD sensitive device.
RoHS status based on EU Directive
2011/65/EU
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Parameter
Specification
Min Typ Max
General Performance
Power Gain
Slope^[1]
Flatness of Frequency Response
Input Return Loss
Output Return Loss
Noise Figure
Total Current Consumption (DC)
27.0
27.5
28.0
29.0
0.5
1.0
2.0
0.8
20
19
18
17
16
20
19
18
17
16
4.6
5.5
250
270
Unit
Condition
V+= 24V; TMB=30°C; ZS=ZL=75Ω; IDC=IDC typical
dB
f=45MHz
dB
f=1218MHz
dB
f=45MHz to 1218MHz
dB
f=45MHz to 1218MHz (Peak to Valley)
dB
f=45MHz to 320MHz
dB
f=320MHz to 640MHz
dB
f=640MHz to 870MHz
dB
f=870MHz to 1000MHz
dB
f=1000MHz to 1218MHz
dB
f=45MHz to 320MHz
dB
f=320MHz to 640MHz
dB
f=640MHz to 870MHz
dB
f=870MHz to 1000MHz
dB
f=1000MHz to 1218MHz
dB
f=50MHz to 1218MHz
mA
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS141001
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
CM4363-E020
2 of 8