RF7206 Datasheet, PDF (2/8 Pages) RF Micro Devices – 3 V W-CDMA BAND 2 LINEAR PA MODULE

RF7206
Absolute Maximum Ratings
Parameter
Supply Voltage in Standby Mode
Supply Voltage in Idle Mode
Supply Voltage in Operating Mode,
50  Load
Supply Voltage, V_BAT
Control Voltage, VMODE0,
VMODE1
Control Voltage, V_EN
RF - Input Power
RF - Output Power
Output Load VSWR (Ruggedness)
Operating Ambient Temperature
Storage Temperature
Rating
6.0
6.0
6.0
6.0
3.5
3.5
+6
+30
10:1
-30 to +110
-55 to +150
Unit
V
V
V
V
V
V
dBm
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EU Directive 2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Specification
Unit
Min.
Typ.
Max.
Condition
Recommended Operating
Conditions
Operating Frequency Range
1850
1910
MHz
V_BAT
+3.0
+3.4
+4.35
V
V_CC
+3.0¹
+3.4
+4.35
V
V_EN
0
0.5
V
PA disabled.
1.4
1.8
3.0
V
PA enabled.
V_MODE0, V_MODE1
0
0.5
V
Logic “low”.
1.5
1.8
3.0
V
Logic “high”.
P_OUT
Maximum Linear Output
(HPM)
28.5^2,3
dBm
High Power Mode (HPM)
Maximum Linear Output
(MPM)
19.0^2,3
dBm
Medium Power Mode (MPM)
Maximum Linear Output
(LPM)
8.0^2,3
dBm
Low Power Mode (LPM)
Ambient Temperature
-30
+25
+85
°C
Notes:
1_{Minimum VCC for max POUT is indicated. VCC down to 0.5 V may be used for backed-off power when using DC/DC converter to conserve battery}
current.
2_{For operation at VCC = +3.2 V, derate POUT by 0.6 dB. For operation at VCC = 3.0 V, derate POUT by 1.3 dB.}
3_{POUT is specified for 3GPP (Voice) modulation. For HSDPA and HSPA+ operation, derate POUT by 1.5 dB:}
HSDPA Configuration: c  12, d  15, hs  24, HSPA+ Configuration: 3GPP Release 7 Subtest 1
2 of 8
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS100805