RF6549 Datasheet, PDF (2/10 Pages) RF Micro Devices – 2.7V to 4.4V, 915MHz Transmit/Receive Module; Thru Mode 400MHz to 928MHz

RF6549
Absolute Maximum Ratings
Parameter
Voltage
Storage Temperature Range
Operating Temperature Range
Maximum Input Power to PA, pin 30, 2
(no damage)
Maximum Input Power to PA, pin 26
(no damage)
Maximum Input Power to LNA, pin 19,22
(no damage)
Thermal Resistance
Rating
5.25
-40 to 150
-40 to 85
+3
+23
+10
52
Unit
V
°C
°C
dBm
dBm
dBm
°C/W
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Nominal Operating Parameters
Parameter
Frequency
Frequency
RF Port Impedance
ESD, Human Body Model
ESD, Human Body Model
ESD, Charge Device Model
ESD, Charge Device Model
Moisture Sensitivity Level
PA Section
Transmit Mode
Power Supply Operating Voltage - Electric
Power Supply Operating Voltage –
Gas/water
Input Power
CW Output Power – near saturation
Output Power - electric
Output Power – gas/water
Output Power Droop – gas/water
Current - Electric
Current –gas/water
Droop Current –gas/water
Large Signal Gain Overall
Second Harmonic
Third – Tenth Harmonic
Specification
Min. Typ. Max.
868 902 to 928
400
928
50
500
500
500
500
MSL3
4
4.2
4.4
2.7
3.6
3.7
0
2
27
27.5
26
26.5
24.5
25
23
250
300
210
250
175
250
27.0
30.0
33.0
-30
-67
Unit
Condition
Specifications are at nominal supply voltage,
control voltage, and temperature - Characteriza-
tion will be done over full voltage and tempera-
ture range specified
MHz
MHz Thru Mode Only, Pin#4 to Pin#19,21

V
RF pins
V
All other pins
V
RF pins
V
All other pins
V
V
dBm
dBm
dBm
dBm
dBm
mA
mA
mA
dB
dBc
dBc
Pa V_CC, V_DIG = 4.2V CNTL1 = High or Low;
CNTL2, 3 and 5 = Low; CNTL4 = High; T = 25°C,
P_OUT = 26.5dBm. Unless otherwise noted.
PA V_CC
PA V_CC
Pin #30
V_CC = 4.2V. P_OUT at ANT1/2
V_CC = 3.6V. P_OUT at ANT1/2
PA V_CC = 2.7V, P_OUT at ANT1/2
PA V_CC = 4.2V, P_OUT = +26.5dBm
PA V_CC = 3.6V and P_OUT = +25dBm
PA V_CC = 2.7V, P_OUT at ANT1/2, P_OUT=23dBm
P_IN = 0dBm at Pin#30 to ANT1/2
P_OUT=27dBm
P_OUT=27dBm
2 of 10
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS121212