RF5725 Datasheet, PDF (2/11 Pages) RF Micro Devices – 2.4GHz TO 2.5GHz SINGLE-BAND FRONT END MODULE

RF5725
Absolute Maximum Ratings
Parameter
DC Supply Voltage
DC Supply Current
Full Specification Temp Range (Full
Spec. Compliant)
Extreme Operating
(Reduced Performance)
Storage Temperature
Maximum TX Input Power
for 11b/g (No Damage)
Moisture Sensitivity
Rating
5.0
240
-10 to +70
-40 to -10
+70 to +85
-40 to +150
5
MSL2
Unit
V
mA
°C
°C
dBm
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Specification
Unit
Min. Typ. Max.
2.4GHz Transmit Parameters
Compliance
Nominal Conditions
Frequency
2.4
2.5
GHz
Output Power
11g 16
17
dBm
11g 15
dBm
11b 20
21
dBm
11b 18
19
dBm
EVM*
3.0
4.0
%
Adjacent Channel Power
ACP1
-38
-34
dBc
ACP2
-56
-53
dBc
Gain
24
26
dB
Gain Variation
V_CC
0.7
dB/V
Frequency -0.5
+0.5
dB
Power Detect
Voltage Detect 0.1
1.5
V
P_OUT = 17 dBm
1.0
V
Input Resistance
10
k
Input Capacitance
5
pF
Bandwidth 800
1000
kHz
P_DETECT Accuracy -1.5
+1.5
dB
*The EVM specification is obtained with a signal generator that has an EVM level
<0.7%.
Condition
IEEE802.11b, IEEE802.11g,
FCC CFG 15.247, .205, .209
Specifications must be met across V_CC, V_REG, frequency,
process, and temperature, unless otherwise specified.
OFDM 54Mbps, V_CC=3.3 < 4.2V, T=10° to 75°C
Derated performance over Freq, Temp, and Process.
11Mbps, CCK, VCC=3.3 < 4.2V, T=10°C to +75°C.
Derated performance over Freq, Temp, and Process.
54Mbps OFDM V_CC3.6V, 50see Note 1, 5
P_OUT(b)=21dBm, 1Mbps CCK, Note 4. Meeting 11b
spectral mask requirements with  3dB margin
P_OUT(b)=21dBm, 1Mbps CCK, Note 4. Meeting 11b
spectral mask requirements with  3dB margin
2.4GHz to 2.5GHz
IEEE802.11g, 54Mbps 64QAM modulation
P_OUT = 17 dBm
2 of 11
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120214