RF5652 Datasheet, PDF (2/21 Pages) RF Micro Devices – 5.0V, 2.4GHz TO 2.7GHz HIGH POWER AMPLIFIER

RF5652
Absolute Maximum Ratings
Parameter
Supply Voltage (RF Applied)
Supply Voltage (No RF Applied)
DC Supply Current
Input RF Power
Operating Ambient Temperature
Storage Temperature
Moisture Sensitivity
*Maximum Input Power with a 50 load.
Rating
-0.5 to +5.25
-0.5 to +6.0
2000
+10*
-40 to +85
-40 to +150
MSL2
Unit
V
V
mA
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Operating Conditions
Frequency
802.11g & 11n Output Power
EVM
Gain
Gain variation over Temp
Second Harmonic
Third Harmonic
Power Detect Range
Power Detect Power Range
Input Return Loss - Tx_in pin
Output Return Loss
Operating Current
Quiescent Current
I_REG
P_DOWN Current
Leakage Current
Power Supply - V_CC
Power supply - V_REG (at Eval Board pin)
Generic Performance
Turn-on time from setting of V_REG's
Stability
Max Pin (Ruggedness - 10:1 VSWR at
Ant)
Max Pin (Ruggedness - 50)
CW P1dB
ESD
Human Body Mode
Charge Device Model
Thermal Resistance
R_{TH_J}
Specification
Min. Typ. Max.
2412
29
31.5
0.2
10
10
8
2.8
30
2.5
33.5
-25
-50
15
10
1450
950
13
0.25
5
2.85
2484
3
37.5
+/-2.5
2.8
33
1650
1050
18
30
0.4
5.25
3
Unit
Condition
T=25 °C, V_CC=5.0V, V_REG=2.85V, using an
IEEE802.11g waveform, 54MBps, unless otherwise
noted
MHz Compliance with standard 802.11b and 802.11g
dBm
%
dB
dB
dBm/MHz
dBm/MHz
V
P_OUT = 0 to 30dBm, usable range from 0 to 32dBm
dBm
dB In specified frequency band
dB In specified frequency band
mA At P_OUT = 30dBm
mA V_CC = 5.0, V_REG = 2.85V & RF=OFF
mA
mA P_DOWN = 0V, V_REG = 2.85V, V_CC = 5V
mA V_CC = 5V, V_REG = 0V, P_DOWN = 0V
V
V
650
-25
37
500
500
500
8.5
nsec Output stable to within 90% of final gain
34
dBm No spurs above -47dBm into 4:1 VSWR
6
dBm No damage for VSWR=10:1
15
dBm No damage for VSWR=1:1
dBm TX mode in 50% Duty Cycle
V
EIA/JESD22-114A RF pins
V
EIA/JESD22-114A DC pins
V
JESD22-C101C all pins
°C/W
2 of 21
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120125